{"title":"Dell PowerEdge R6515 Replacement Parts and Upgrades","description":null,"products":[{"product_id":"enterprise-600gb-15k-sas-refurbished","title":"Enterprise 600GB 15K SAS - Refurbished *Special Buy","description":"\u003cp\u003eRefurbished enterprise 600GB 15K SAS hard drive, a fast-spindle 2.5-inch drive for SFF SAS bays in Dell PowerEdge and HPE ProLiant servers. Refurbished enterprise SAS hard drives are the capacity tier of a server: previously deployed, tested, and sold by capacity, spindle speed and form factor rather than by brand, because the manufacturer varies by lot. They run on any PERC, Smart Array or HBA with a SAS backplane, at the link speed the controller and backplane negotiate.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e600 GB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e2.5-inch SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e15,000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis is a SAS drive, so it needs a hardware PERC, Smart Array or HBA and a SAS backplane; onboard SATA ports and SATA-only software RAID will not run it. In a chassis built with 3.5-inch bays it needs a 2.5-to-3.5 adapter carrier. Carriers do not cross over: Dell 13th gen trays differ from 14th to 16th gen trays, and HPE uses its own carriers, so we match the tray to your chassis. The drive runs at the link speed the controller and backplane negotiate. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl560-gen10-parts\"\u003eHPE ProLiant DL560 Gen10\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the 15K when you are replacing a member of an existing 15K array or running a latency-sensitive legacy workload on spinning disk. It seeks faster than the 600GB 10K, which is the cheaper drive at the same size. For new performance builds, a SAS SSD beats any 15K spindle on random I\/O and is usually the better buy.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951240831175,"sku":"D-250146","price":13.9,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-900gb-10k-sas-refurbished-1","title":"Enterprise 900GB 10K SAS - Refurbished *Reduced Price","description":"\u003cp\u003eRefurbished enterprise 900GB 10K SAS hard drive, a 2.5-inch drive for SFF SAS bays in Dell PowerEdge and HPE ProLiant servers. Our refurbished enterprise SAS hard drives form the capacity tier of a server: previously deployed, tested, and sold by capacity, spindle speed and form factor rather than brand, since the manufacturer varies by lot. They run on any PERC, Smart Array or HBA with a SAS backplane, at whatever link speed the controller and backplane negotiate.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e900 GB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e2.5-inch SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e10,000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eSAS only: the drive needs a SAS controller (PERC, Smart Array or an HBA) and a SAS backplane, and it will not run from onboard SATA. A 3.5-inch bay takes it only in a 2.5-to-3.5 adapter carrier. Dell changed tray design between 13th gen and 14th gen, and HPE carriers are their own design, so we match the tray to the chassis you run. Link speed is whatever the controller and backplane negotiate. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r830-parts\"\u003eDell PowerEdge R830\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 900GB 10K is a solid value for boot volumes with room for local logs, small VM datastores and replacements in an existing 900GB array, including four-socket hosts like the R830. It sits between the 600GB and 1.2TB 10K; match capacities within a virtual disk. For write-heavy databases, a SAS SSD is the better choice.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951240798407,"sku":"D-250147","price":25.8,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-600gb-10k-sas-refurbished-1","title":"Enterprise 600GB 10K SAS - Refurbished *Reduced Price","description":"\u003cp\u003eRefurbished enterprise 600GB 10K SAS hard drive, a small-capacity 2.5-inch drive for SFF SAS bays in Dell PowerEdge and HPE ProLiant servers. Refurbished enterprise SAS hard drives are the capacity tier of a server, previously deployed and tested, and we sell them by capacity, spindle speed and form factor rather than by brand because the manufacturer varies by lot. They run on any PERC, Smart Array or HBA with a SAS backplane, at the link speed the controller and backplane negotiate.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e600 GB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e2.5-inch SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e10,000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eIt needs a SAS path end to end: a PERC, Smart Array or HBA plus a SAS backplane. Onboard SATA and SATA-only software RAID do not see SAS drives. Dropped into a 3.5-inch bay, it needs a 2.5-to-3.5 adapter carrier. Dell 13th gen trays do not fit 14th to 16th gen bays and HPE carriers are not interchangeable with Dell, so we match the tray to your chassis. The link runs at the speed the controller and backplane negotiate. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r640-parts\"\u003eDell PowerEdge R640\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 600GB 10K is a boot mirror and spare-replacement drive: OS volumes, hypervisor boot and like-for-like swaps in an existing 600GB array. The 600GB 15K is the same size with lower seek latency at a higher cost; this 10K version is the economical choice. For new data volumes, the 1.2TB 10K or a SAS SSD gives far better value.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951240929479,"sku":"D-250145","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/enterprise-600gb-10k-sas-refurbished-173572.jpg?v=1765539623"},{"product_id":"4x-10gbe-intel-x550-t4-64pj8","title":"Dell Intel X550-T4 4x 10Gb Ethernet","description":"","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951240896711,"sku":"N-000007","price":84.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-intel-x550-t4-4-port-10gbe-64pj8-396036.jpg?v=1765539624"},{"product_id":"perc-h330-raid-controller","title":"PERC H330 RAID Controller","description":"\u003cp\u003eRefurbished Dell PERC H330 Mini Mono, a cacheless 12 Gb\/s RAID controller for the dedicated mini PERC slot in Dell 13th and 14th gen PowerEdge servers. The PERC H330 is the entry controller of Dell's PERC 9 family, built on the LSI SAS3008 with 8 lanes of 12 Gb\/s SAS and no cache or battery. It suits boot mirrors, RAID 10 sets and non-RAID drives rather than parity arrays.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e9JXVW, GDJ3J, R75VT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003ePERC 9, LSI SAS3008\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCache\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003e12 Gb\/s SAS, 6 Gb\/s SATA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInternal ports\u003c\/th\u003e\n\u003ctd\u003e8 lanes, 2x4 internal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003ePCIe 3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003eMini Mono\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRAID levels\u003c\/th\u003e\n\u003ctd\u003e0, 1, 5, 10, 50, non-RAID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe mini mono board installs in the integrated storage controller slot and cables to the drive backplane, so it leaves the PCIe slots free. It does not fit a PCIe slot (the H330 adapter does that job) or a blade. Backplane SAS cables are chassis parts and stay with the server. No cache means no battery or battery cable to source. 15th gen servers moved to PERC 11 and a different controller slot; this card does not fit them. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r730-parts\"\u003eDell PowerEdge R730\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the H330 Mini for boot mirrors, RAID 10 sets and hosts whose data lives on a SAN. Dell's own guide notes the missing cache costs RAID 5 and 50 performance, so for parity arrays take the H730P with 2 GB NV cache, or the H740P on 14th gen. For software-defined storage, the HBA330 is the cleaner pass-through.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951245451463,"sku":"RD-000001","price":21.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/perc-h330-raid-controller-825898.jpg?v=1765539630"},{"product_id":"perc-h730p-raid-controller-2gb-cache","title":"PERC H730p RAID Controller with 2GB Cache","description":"\u003cp\u003eRefurbished Dell PERC H730P Mini Mono with 2 GB NV cache, a RAID controller for the dedicated mini PERC slot in Dell 13th and 14th gen PowerEdge servers. The PERC H730P belongs to Dell's PERC 9 family, built on the LSI SAS3108 RAID-on-chip with 2 GB of battery-backed non-volatile cache. It is the write-back controller for parity arrays, databases and busy virtual machine stores on local drives.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e7H4CN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003ePERC 9, LSI SAS3108\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCache\u003c\/th\u003e\n\u003ctd\u003e2 GB NV, DDR3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCache protection\u003c\/th\u003e\n\u003ctd\u003eBattery with flash offload\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003e12 Gb\/s SAS, 6 Gb\/s SATA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInternal ports\u003c\/th\u003e\n\u003ctd\u003e8 lanes, 2x4 internal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003eMini Mono\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRAID levels\u003c\/th\u003e\n\u003ctd\u003e0, 1, 5, 6, 10, 50, 60, non-RAID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe mini mono board seats in the integrated storage controller slot and cables to the drive backplane, so it costs no PCIe slot; it does not fit a PCIe slot (the H730P adapter does) or a blade. Write-back runs only while the battery is present and healthy. Backplane SAS cables stay with the chassis. It does not carry forward to 15th gen servers, which moved to PERC 11 and a new controller slot. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r740-parts\"\u003eDell PowerEdge R740\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the H730P Mini for databases, VM datastores and RAID 6 sets on 13th gen hosts, where it is the top internal controller: Dell offers no H740P on 13th gen. In a 14th gen server it remains a solid choice, but the H740P with 8 GB NV cache is our production default for write-heavy work there. For vSAN or ZFS, take the HBA330.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951245353159,"sku":"RD-000003","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/perc-h730p-raid-controller-2gb-cache-683193.jpg?v=1765539630"},{"product_id":"perc-hba330-raid-controller-1","title":"PERC HBA330 Controller (Non-RAID)","description":"\u003cp\u003eRefurbished Dell HBA330 Mini Mono, a 12 Gb\/s non-RAID host bus adapter for the dedicated mini PERC slot in Dell 13th and 14th gen PowerEdge servers. The HBA330 is Dell's PERC 9 era host bus adapter, built on the LSI SAS3008 with 8 lanes of 12 Gb\/s SAS and no cache. It passes every drive straight to the operating system for vSAN, Storage Spaces Direct, Ceph and ZFS.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e71H1J\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eHBA, LSI SAS3008\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCache\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003e12 Gb\/s SAS, 6 Gb\/s SATA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInternal ports\u003c\/th\u003e\n\u003ctd\u003e8 lanes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003ePCIe 3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003eMini Mono\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRAID levels\u003c\/th\u003e\n\u003ctd\u003eNone, non-RAID pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis is the mini mono board: it seats in the integrated storage controller slot, cables to the drive backplane and leaves every rear PCIe slot free. It does not fit a PCIe slot; the HBA330 low profile adapter covers servers without the mini slot. The backplane SAS cables are chassis parts and stay with the server. There is no RAID engine and no cache, so there is no battery to fit; plan redundancy in the operating system. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r740-parts\"\u003eDell PowerEdge R740\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the HBA330 Mini when the hypervisor or file system owns redundancy: vSAN, Storage Spaces Direct, Ceph and ZFS want raw disks with no controller cache in the path. It is not a RAID controller. For a hardware boot mirror, take the H330; for parity arrays with write-back cache, the H730P. Check firmware against the vSAN or Storage Spaces Direct compatibility list first.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951245582535,"sku":"RD-000017","price":16.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/perc-hba330-raid-controller-426597.jpg?v=1765539630"},{"product_id":"new-intel-s4520-1-92tb-sata-ssd-1","title":"New Intel S4520 1.92TB SATA SSD","description":"\u003cp\u003eNew 1.92TB Intel D3-S4520 SATA SSD, a read-intensive drive for the 2.5-inch bays of Dell 13th to 16th gen and HPE Gen9 to Gen10 Plus. SATA SSDs run on a 6 Gb\/s SATA link that SAS and SATA controllers and backplanes all accept, which makes them the most widely compatible flash in a server. The lines we stock run from datacenter drives with power-loss protection and published endurance ratings to client-class drives for boot volumes and light duty, so the model matters more than the interface.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eSSDSC2KB019TZ01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e1.92 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSATA 6 Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNAND\u003c\/th\u003e\n\u003ctd\u003e144-layer 3D TLC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEndurance\u003c\/th\u003e\n\u003ctd\u003e8.8 PBW, 5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSequential read\/write\u003c\/th\u003e\n\u003ctd\u003e550 \/ 510 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRandom read\/write\u003c\/th\u003e\n\u003ctd\u003e91K \/ 38K IOPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower loss protection\u003c\/th\u003e\n\u003ctd\u003eYes, on-board capacitors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eSATA drives run on SAS and SATA controllers and backplanes alike, so it fits any PERC, Smart Array or HBA bay; the link is 6 Gb\/s whatever the controller supports. In a 3.5-inch bay it needs a 2.5-to-3.5 adapter carrier. Dell 13th gen trays differ from 14th to 16th gen trays, and HPE uses its own carriers; we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r730xd-parts\"\u003eDell PowerEdge R730xd\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the 1.92TB S4520 for read-intensive capacity: VM images, analytics and content volumes. The mixed-use S4620 1.92TB carries 14.0 PBW against 8.8 PBW and 53K against 38K random write IOPS, so it is the pick for databases. On a SAS array the Samsung PM1643a 1.92TB reads faster over the SAS link. Hardware AES-256 encryption is built in.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Intel","offers":[{"title":"Default Title","offer_id":45951245058247,"sku":"D-250172","price":1429.5,"currency_code":"USD","in_stock":true}]},{"product_id":"new-intel-s4520-3-84tb-sata-ssd-1","title":"New Intel S4520 3.84TB SATA SSD","description":"\u003cp\u003eNew Intel D3-S4520 3.84TB SATA SSD, a high-capacity read-intensive drive for the 2.5-inch bays in Dell PowerEdge and HPE ProLiant. SATA SSDs run on a 6 Gb\/s SATA link that SAS and SATA controllers and backplanes all accept, which makes them the most widely compatible flash in a server. The lines we stock run from datacenter drives with power-loss protection and published endurance ratings to client-class drives for boot volumes and light duty, so the model matters more than the interface.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eSSDSC2KB038TZ01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e3.84 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSATA 6 Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNAND\u003c\/th\u003e\n\u003ctd\u003e144-layer 3D TLC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEndurance\u003c\/th\u003e\n\u003ctd\u003e15.3 PBW, 5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSequential read\/write\u003c\/th\u003e\n\u003ctd\u003e550 \/ 510 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRandom read\/write\u003c\/th\u003e\n\u003ctd\u003e92K \/ 31K IOPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower loss protection\u003c\/th\u003e\n\u003ctd\u003eYes, on-board capacitors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eSATA drives run on SAS and SATA controllers and backplanes alike, so it fits any PERC, Smart Array or HBA bay; the link is 6 Gb\/s whatever the controller supports. In a 3.5-inch bay it needs a 2.5-to-3.5 adapter carrier. Dell 13th gen trays differ from 14th to 16th gen trays, and HPE uses its own carriers; we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl380-gen9-parts\"\u003eHPE ProLiant DL380 Gen9\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the 3.84TB S4520 for the largest read-intensive volume a SATA bay can hold: backup staging, media and archive tiers. Random writes drop to 31K IOPS at this capacity, so keep write-heavy duty on a mixed-use drive such as the S4620. On a SAS array the Samsung PM1643a 3.84TB or Kioxia PM7-R 3.84TB gives the faster SAS link. Hardware AES-256 encryption is built in.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Intel","offers":[{"title":"Default Title","offer_id":45951245123783,"sku":"D-250173","price":2737.4,"currency_code":"USD","in_stock":true}]},{"product_id":"new-intel-s4520-480gb-sata-ssd-1","title":"New Intel S4520 480GB SATA SSD *Special Buy","description":"\u003cp\u003eNew Intel 480GB D3-S4520 SATA SSD, a read-intensive datacenter drive for 2.5-inch bays in Dell 13th to 16th gen and HPE Gen9 to Gen10 Plus servers. SATA SSDs run on a 6 Gb\/s SATA link that SAS and SATA controllers and backplanes all accept, which makes them the most widely compatible flash in a server. The lines we stock run from datacenter drives with power-loss protection and published endurance ratings to client-class drives for boot volumes and light duty, so the model matters more than the interface.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eSSDSC2KB480GZ01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e480 GB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSATA 6 Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNAND\u003c\/th\u003e\n\u003ctd\u003e144-layer 3D TLC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEndurance\u003c\/th\u003e\n\u003ctd\u003e2.5 PBW, 5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSequential read\/write\u003c\/th\u003e\n\u003ctd\u003e550 \/ 460 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRandom read\/write\u003c\/th\u003e\n\u003ctd\u003e79K \/ 30K IOPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower loss protection\u003c\/th\u003e\n\u003ctd\u003eYes, on-board capacitors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eSATA drives run on SAS and SATA controllers and backplanes alike, so it fits any PERC, Smart Array or HBA bay; the link is 6 Gb\/s whatever the controller supports. In a 3.5-inch bay it needs a 2.5-to-3.5 adapter carrier. Dell 13th gen trays differ from 14th to 16th gen trays, and HPE uses its own carriers; we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r440-parts\"\u003eDell PowerEdge R440\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the 480GB S4520 for boot mirrors with room for logs and images, or a small read-intensive volume. It writes twice as fast as the 240GB and carries 2.5 PBW. For a VM datastore step up to the 960GB, which reaches 510 MB\/s writes. It is read-intensive; mixed-use write duty belongs on the S4620. Hardware AES-256 encryption is built in.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Intel","offers":[{"title":"Default Title","offer_id":45951245222087,"sku":"D-250170","price":867.9,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-480gb-sas-ssd-12gb-s-refurbished-1","title":"Enterprise 480GB SAS SSD 12Gb\/s - Refurbished","description":"\u003cp\u003eRefurbished enterprise 480GB SAS SSD, a low-cost flash boot drive for 2.5-inch SAS bays in Dell PowerEdge 13th to 16th gen and HPE ProLiant Gen9 to Gen10 Plus servers. Refurbished SAS SSDs are previously deployed enterprise flash drives, tested and sold by capacity and interface because the manufacturer and model vary by lot. They give a SAS array flash latency at a fraction of new-drive cost, on any SAS-capable PERC, Smart Array or HBA.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e480 GB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS 12 Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e2.5-inch SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis 2.5-inch SAS SSD needs a SAS controller and SAS backplane, the same ones that run SAS hard drives; SATA-only ports and NVMe-only bays cannot run it. Expect 12 Gb\/s on 12 Gb\/s PERC and Smart Array controllers and a negotiated lower rate on older SAS hardware. A 3.5-inch bay needs a 2.5-to-3.5 adapter carrier. Dell trays for 13th gen and for 14th to 16th gen are different parts, HPE carriers are their own, and we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r630-parts\"\u003eDell PowerEdge R630\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThis is the cost option for boot mirrors, hypervisor installs and small read-mostly volumes. It was previously deployed and its endurance class varies by lot, so keep it off heavy write duty. The New 480GB costs more but arrives unused with its full service life ahead; pick that one for a production host you do not want to touch for years.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951245189319,"sku":"D-250153","price":314.4,"currency_code":"USD","in_stock":true}]},{"product_id":"new-intel-s4520-960gb-sata-ssd-1","title":"New Intel S4520 960GB SATA SSD","description":"\u003cp\u003eNew Intel S4520 960GB SATA SSD, the read-intensive member of the D3 line, for 2.5-inch bays in Dell PowerEdge and HPE ProLiant servers. SATA SSDs run on a 6 Gb\/s SATA link that SAS and SATA controllers and backplanes all accept, which makes them the most widely compatible flash in a server. The lines we stock run from datacenter drives with power-loss protection and published endurance ratings to client-class drives for boot volumes and light duty, so the model matters more than the interface.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eSSDSC2KB960GZ01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e960 GB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSATA 6 Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNAND\u003c\/th\u003e\n\u003ctd\u003e144-layer 3D TLC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEndurance\u003c\/th\u003e\n\u003ctd\u003e5.4 PBW, 5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSequential read\/write\u003c\/th\u003e\n\u003ctd\u003e550 \/ 510 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRandom read\/write\u003c\/th\u003e\n\u003ctd\u003e90K \/ 43K IOPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eSATA drives run on SAS and SATA controllers and backplanes alike, so it fits any PERC, Smart Array or HBA bay; the link is 6 Gb\/s whatever the controller supports. In a 3.5-inch bay it needs a 2.5-to-3.5 adapter carrier. Dell 13th gen trays differ from 14th to 16th gen trays, and HPE uses its own carriers; we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r740-parts\"\u003eDell PowerEdge R740\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the 960GB S4520 for read-intensive VM datastores, web and file tiers on any bay, SAS or SATA. Its mixed-use counterpart, the S4620 960GB, carries 7.1 PBW against 5.4 PBW and 54K against 43K random write IOPS; pick that for databases and logging. On a SAS backplane the Samsung PM1643a 960GB reads faster. Hardware AES-256 encryption is built in.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951245549767,"sku":"D-250171","price":965.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/new-intel-s4520-960gb-sata-ssd-209401.png?v=1765539627"},{"product_id":"new-enterprise-3-84tb-sas-ssd-12gb-s-1","title":"NEW Samsung PM1643a 3.84TB SAS 12Gbps 2.5in SSD MZILT3T8HBLS","description":"\u003cp\u003eNew Samsung PM1643a 3.84TB 12 Gb\/s SAS SSD, a high-capacity read-intensive drive for the 2.5-inch SAS bays in Dell PowerEdge and HPE ProLiant. SAS SSDs are the enterprise flash tier for SAS backplanes: they use the same PERC, Smart Array and HBA controllers and the same bays as SAS hard drives, with the full-duplex SAS link and its error handling. They are the straightforward flash upgrade for an existing SAS array.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eMZILT3T8HBLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e3.84 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS 12 Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNAND\u003c\/th\u003e\n\u003ctd\u003eSamsung V-NAND TLC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEndurance\u003c\/th\u003e\n\u003ctd\u003e1 DWPD, 5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSequential read\/write\u003c\/th\u003e\n\u003ctd\u003e2,100 \/ 2,000 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRandom read\/write\u003c\/th\u003e\n\u003ctd\u003e450K \/ 90K IOPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower loss protection\u003c\/th\u003e\n\u003ctd\u003eYes, tantalum capacitors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis is a 12 Gb\/s SAS drive: it needs a SAS controller and SAS backplane, and a SATA-only controller cannot run it. It links at 12 Gb\/s on PERC, Smart Array and HBA controllers alike, including a 24G-capable PERC 12. In a 3.5-inch bay it needs a 2.5-to-3.5 adapter carrier. Dell 13th gen trays differ from 14th to 16th gen trays, and HPE uses its own carriers; we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl360-gen10-plus-parts\"\u003eHPE ProLiant DL360 Gen10 Plus\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the 3.84TB PM1643a for the biggest read-intensive SAS volumes: VM datastores, analytics and archives that are read far more than written. On 12 Gb\/s PERC and Smart Array controllers it gives up little to the 24G Kioxia PM7-R 3.84TB, which only pulls ahead on a PERC 12 H965i. Against the SATA Intel S4520 3.84TB it has the faster SAS link; for heavy writes take the mixed-use PM7-V.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951245254855,"sku":"D-0350157","price":1278.0,"currency_code":"USD","in_stock":true}]},{"product_id":"new-enterprise-1-92tb-sas-ssd-12gb-s-1","title":"NEW Samsung PM1643a 1.92TB SAS 12Gbps 2.5in SSD MZILT1T9HBJR","description":"\u003cp\u003eNew Samsung 1.92TB SAS SSD, a PM1643a read-intensive drive for 2.5-inch SAS bays in Dell 13th to 16th gen and HPE Gen9 to Gen10 Plus. SAS SSDs are the enterprise flash tier for SAS backplanes: they use the same PERC, Smart Array and HBA controllers and the same bays as SAS hard drives, with the full-duplex SAS link and its error handling. They are the straightforward flash upgrade for an existing SAS array.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eMZILT1T9HBJR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e1.92 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS 12 Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNAND\u003c\/th\u003e\n\u003ctd\u003eSamsung V-NAND TLC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEndurance\u003c\/th\u003e\n\u003ctd\u003e1 DWPD, 5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSequential read\/write\u003c\/th\u003e\n\u003ctd\u003e2,100 \/ 1,800 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRandom read\/write\u003c\/th\u003e\n\u003ctd\u003e430K \/ 60K IOPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower loss protection\u003c\/th\u003e\n\u003ctd\u003eYes, tantalum capacitors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis is a 12 Gb\/s SAS drive: it needs a SAS controller and SAS backplane, and a SATA-only controller cannot run it. It links at 12 Gb\/s on PERC, Smart Array and HBA controllers alike, including a 24G-capable PERC 12. In a 3.5-inch bay it needs a 2.5-to-3.5 adapter carrier. Dell 13th gen trays differ from 14th to 16th gen trays, and HPE uses its own carriers; we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r740xd-parts\"\u003eDell PowerEdge R740xd\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the 1.92TB PM1643a for read-intensive VM datastores and file or web tiers on an existing SAS array. Against the SATA Intel S4520 1.92TB it reads close to four times faster sequentially (2,100 vs 550 MB\/s) over the SAS link. It is rated 1 DWPD, so for databases with heavy writes the mixed-use S4620 1.92TB or the Kioxia PM7-V is the better fit.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951245615303,"sku":"D-0350156","price":903.0,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-960gb-sas-ssd-12gb-s-refurbished-1","title":"Enterprise 960GB SAS SSD 12Gb\/s - Refurbished","description":"\u003cp\u003eRefurbished enterprise 960GB SAS SSD, a tested flash drive for 2.5-inch SAS bays in HPE ProLiant Gen9 to Gen10 Plus and Dell PowerEdge 13th to 16th gen servers. Refurbished SAS SSDs are previously deployed enterprise flash drives, tested and sold by capacity and interface because the manufacturer and model vary by lot. They give a SAS array flash latency at a fraction of new-drive cost, on any SAS-capable PERC, Smart Array or HBA.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e960 GB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS 12 Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e2.5-inch SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis 2.5-inch SAS SSD needs a SAS controller and SAS backplane, the same ones that run SAS hard drives; SATA-only ports and NVMe-only bays cannot run it. Expect 12 Gb\/s on 12 Gb\/s PERC and Smart Array controllers and a negotiated lower rate on older SAS hardware. A 3.5-inch bay needs a 2.5-to-3.5 adapter carrier. Dell trays for 13th gen and for 14th to 16th gen are different parts, HPE carriers are their own, and we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl380-gen9-parts\"\u003eHPE ProLiant DL380 Gen9\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eBuy this one on cost: it puts VM datastores and application volumes on flash for less than the New 960GB, which you would choose for an unused drive with its whole service life ahead. Against a 1.2TB 10K hard drive it gives up some capacity for far lower latency. Endurance varies by lot, so watch heavy write workloads.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951245746375,"sku":"D-250154","price":349.0,"currency_code":"USD","in_stock":true}]},{"product_id":"new-enterprise-480gb-sas-ssd-12gb-s-1","title":"New Enterprise 480GB SAS SSD 12Gb\/s","description":"\u003cp\u003eNew enterprise 480GB SAS SSD, a 12 Gb\/s flash drive for 2.5-inch SAS bays in Dell 13th to 16th gen PowerEdge and HPE Gen9 to Gen10 Plus ProLiant servers. SAS SSDs are the enterprise flash tier for SAS backplanes: they use the same PERC, Smart Array and HBA controllers and the same bays as SAS hard drives, with the full-duplex SAS link and its error handling. They are the straightforward flash upgrade for an existing SAS array.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e480 GB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS 12 Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e2.5-inch SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eA 2.5-inch SAS SSD fits any SAS-capable 2.5-inch bay on a PERC, Smart Array or HBA, the same bays and controllers as SAS hard drives; a SATA-only port or an NVMe-only bay will not run it. It links at 12 Gb\/s on 12 Gb\/s controllers and negotiates down on older SAS hardware. In a 3.5-inch bay it needs a 2.5-to-3.5 adapter carrier. Dell 13th gen trays differ from 14th to 16th gen trays, HPE uses its own carriers, and we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl360-gen9-parts\"\u003eHPE ProLiant DL360 Gen9\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 480GB is sized for boot mirrors, hypervisor installs and small read-heavy volumes on a SAS array, where flash latency beats a 10K spindle. Endurance class, NAND and performance vary by lot, so if the workload needs a published DWPD rating, pick a branded SAS SSD such as the Samsung PM1643a. Choose New for an unused drive with its full service life ahead; the refurbished 480GB is the lower-cost route to the same capacity.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951245811911,"sku":"D-250174","price":415.6,"currency_code":"USD","in_stock":true}]},{"product_id":"new-enterprise-2-4tb-10k-sas-2-5-hard-drive-12gb-s-2","title":"New Enterprise 2.4TB 10K SAS 2.5 Hard Drive 12Gb\/s *Special Buy","description":"\u003cp\u003eNew enterprise 2.4TB 10K SAS hard drive, the largest 2.5-inch 10K spindle we carry for SFF bays in Dell PowerEdge 13th to 16th gen and HPE ProLiant Gen9 to Gen10 Plus. These are unused drives from commodity enterprise lines, sourced by availability, so the brand on the label varies while capacity, spindle speed, interface and form factor stay fixed. They suit buyers who want spindles with their full service life ahead, on any SAS-capable PERC, Smart Array or HBA.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e2.4 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS 12 Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e2.5-inch SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e10,000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis 2.5-inch SAS drive needs a SAS controller and SAS backplane; a SATA-only port will not run it. It links at 12 Gb\/s on 12 Gb\/s PERC and Smart Array controllers and at 6 Gb\/s on older SAS hardware. A 3.5-inch bay needs a 2.5-to-3.5 adapter carrier. Dell 13th gen trays differ from 14th to 16th gen trays, HPE uses its own carriers, and we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r650-parts\"\u003eDell PowerEdge R650\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 2.4TB 10K packs the most spinning capacity into a 2.5-inch bay, good for dense SFF chassis serving file shares, backup staging or VM images. The tradeoff is a longer rebuild than the 1.8TB and the same spindle IOPS, so keep it off latency-bound databases. New means unused, with its full service life ahead; the refurbished 2.4TB 10K trades that for cost.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eAbove 2 TB, a single-drive boot volume needs a GPT partition table and UEFI boot mode; legacy BIOS with MBR cannot address the full 2.4 TB. The same applies to any virtual disk larger than 2 TB you boot from.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951245516999,"sku":"D-250160","price":902.8,"currency_code":"USD","in_stock":true}]},{"product_id":"new-enterprise-1-2tb-10k-sas-2-5-hard-drive-12gb-s","title":"New Enterprise 1.2TB 10K SAS 2.5 Hard Drive 12Gb\/s *Reduced Price","description":"\u003cp\u003eNew enterprise 1.2TB 10K SAS hard drive, a 2.5-inch 12 Gb\/s spindle for SFF bays in Dell 13th to 16th gen PowerEdge and HPE Gen9 to Gen10 Plus ProLiant servers. These are unused drives from commodity enterprise lines, sourced by availability, so the brand on the label varies while capacity, spindle speed, interface and form factor stay fixed. They suit buyers who want spindles with their full service life ahead, on any SAS-capable PERC, Smart Array or HBA.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e1.2 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS 12 Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e2.5-inch SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e10,000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis 2.5-inch SAS drive needs a SAS controller and SAS backplane; a SATA-only port will not run it. It links at 12 Gb\/s on 12 Gb\/s PERC and Smart Array controllers and at 6 Gb\/s on older SAS hardware. A 3.5-inch bay needs a 2.5-to-3.5 adapter carrier. Dell 13th gen trays differ from 14th to 16th gen trays, HPE uses its own carriers, and we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r740-parts\"\u003eDell PowerEdge R740\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003ePick the 1.2TB 10K for boot mirrors, hypervisor local storage and file shares where spindle latency is acceptable and the budget per bay matters more than IOPS. For database logs or busy VM datastores, a 960GB SAS SSD answers random I\/O that no 10K spindle can. Buy this New drive when you want it unused, with its full service life ahead; the refurbished 1.2TB 10K costs less and suits spares pools and lab hosts.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951245680839,"sku":"D-250158","price":86.2,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-1-2tb-10k-sas-refurbished-1","title":"Enterprise 1.2TB 10K SAS - Refurbished *Reduced Price","description":"\u003cp\u003eRefurbished enterprise 1.2TB 10K SAS hard drive, a 2.5-inch spinning disk for small-form-factor SAS bays in Dell PowerEdge and HPE ProLiant servers. Refurbished enterprise SAS hard drives are the capacity tier of a server: previously deployed, tested, and sold by capacity, spindle speed and form factor rather than by brand, because the manufacturer varies by lot. They run on any PERC, Smart Array or HBA with a SAS backplane, at the link speed the controller and backplane negotiate.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e1.2 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e2.5-inch SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e10,000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis is a SAS drive, so it needs a hardware PERC, Smart Array or HBA and a SAS backplane; onboard SATA ports and SATA-only software RAID will not run it. In a chassis built with 3.5-inch bays it needs a 2.5-to-3.5 adapter carrier. Carriers do not cross over: Dell 13th gen trays differ from 14th to 16th gen trays, and HPE uses its own carriers, so we match the tray to your chassis. The drive runs at the link speed the controller and backplane negotiate. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r730-parts\"\u003eDell PowerEdge R730\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 1.2TB 10K is the middle of the 2.5-inch spinning range and a common size for VM datastores and file shares on a RAID 10 or RAID 6 set. It gives twice the space of the 600GB 10K at the same spindle speed. If the workload is random-heavy, such as a database or many busy VMs, a SAS SSD outperforms any number of 10K spindles; the 1.2TB is for capacity at sensible cost.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951245779143,"sku":"D-250148","price":39.9,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-3-84tb-sas-ssd-12gb-s-refurbished","title":"Enterprise 3.84TB SAS SSD 12Gb\/s - Refurbished","description":"\u003cp\u003eRefurbished enterprise 3.84TB SAS SSD, a high-capacity 12 Gb\/s flash drive for 2.5-inch SAS bays in HPE Gen9 to Gen10 Plus ProLiant and Dell 13th to 16th gen PowerEdge servers. Refurbished SAS SSDs are previously deployed enterprise flash drives, tested and sold by capacity and interface because the manufacturer and model vary by lot. They give a SAS array flash latency at a fraction of new-drive cost, on any SAS-capable PERC, Smart Array or HBA.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e3.84 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS 12 Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e2.5-inch SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis 2.5-inch SAS SSD needs a SAS controller and SAS backplane, the same ones that run SAS hard drives; SATA-only ports and NVMe-only bays cannot run it. Expect 12 Gb\/s on 12 Gb\/s PERC and Smart Array controllers and a negotiated lower rate on older SAS hardware. A 3.5-inch bay needs a 2.5-to-3.5 adapter carrier. Dell trays for 13th gen and for 14th to 16th gen are different parts, HPE carriers are their own, and we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl360-gen10-plus-parts\"\u003eHPE ProLiant DL360 Gen10 Plus\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe refurbished 3.84TB is the budget way to move a large spinning SAS array onto fewer flash drives. The New 3.84TB costs more and arrives unused with its full service life ahead, the choice for a long production deployment. Endurance varies by lot; for read-leaning VM, file and analytics volumes this is the value pick, while write-heavy work belongs on a rated drive.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951245844679,"sku":"D-250178","price":902.8,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-2tb-7-2k-sas-refurbished-1","title":"Enterprise 2TB 7.2K SAS - Refurbished *Reduced Price","description":"\u003cp\u003eRefurbished enterprise 2TB 7.2K SAS hard drive, a 2.5-inch nearline capacity drive for SFF SAS bays in Dell PowerEdge and HPE ProLiant servers. Refurbished enterprise SAS hard drives are the capacity tier of a server: previously deployed, tested, and sold by capacity, spindle speed and form factor rather than by brand, because the manufacturer varies by lot. They run on any PERC, Smart Array or HBA with a SAS backplane, at the link speed the controller and backplane negotiate.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e2 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e2.5-inch SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e7,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eSAS only: the drive needs a SAS controller (PERC, Smart Array or an HBA) and a SAS backplane, and it will not run from onboard SATA. A 3.5-inch bay takes it only in a 2.5-to-3.5 adapter carrier. Dell changed tray design between 13th gen and 14th gen, and HPE carriers are their own design, so we match the tray to the chassis you run. Link speed is whatever the controller and backplane negotiate. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl360-gen10-parts\"\u003eHPE ProLiant DL360 Gen10\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThis is the 2.5-inch 2TB, for SFF bays where a 3.5-inch drive cannot go, such as an 8-bay 1U. In a server with 3.5-inch LFF bays, the 2TB 3.5-inch SAS drive fits directly and is the better buy. At 7,200 RPM it suits backup staging, logs and bulk file storage; for VM datastores, the 1.8TB or 2.4TB 10K is faster per spindle.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951245910215,"sku":"D-250150","price":111.9,"currency_code":"USD","in_stock":true}]},{"product_id":"new-enterprise-1-8tb-10k-sas-2-5-hard-drive-12gb-s-1","title":"New Enterprise 1.8TB 10K SAS 2.5 Hard Drive 12Gb\/s","description":"\u003cp\u003eNew enterprise 1.8TB 10K SAS hard drive, a 2.5-inch SFF unit that adds capacity per bay to Dell 13th through 16th gen PowerEdge and HPE Gen9, Gen10 and Gen10 Plus ProLiant arrays. These are unused drives from commodity enterprise lines, sourced by availability, so the brand on the label varies while capacity, spindle speed, interface and form factor stay fixed. They suit buyers who want spindles with their full service life ahead, on any SAS-capable PERC, Smart Array or HBA.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e1.8 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS 12 Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e2.5-inch SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e10,000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis 2.5-inch SAS drive needs a SAS controller and SAS backplane; a SATA-only port will not run it. It links at 12 Gb\/s on 12 Gb\/s PERC and Smart Array controllers and at 6 Gb\/s on older SAS hardware. A 3.5-inch bay needs a 2.5-to-3.5 adapter carrier. Dell 13th gen trays differ from 14th to 16th gen trays, HPE uses its own carriers, and we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl380-gen10-parts\"\u003eHPE ProLiant DL380 Gen10\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 1.8TB sits in the middle of the 2.5-inch 10K line: half again the space of the 1.2TB per bay, with a shorter rebuild than the 2.4TB. It suits general file storage, application servers and VM hosts with moderate I\/O. Where latency rules, step to a SAS SSD instead. Choose New for an unused spindle with every hour of its service life still ahead; the refurbished 1.8TB 10K is the lower-cost pick for spares and secondary arrays.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951245975751,"sku":"D-250159","price":265.5,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-1-8tb-10k-sas-refurbished-1","title":"Enterprise 1.8TB 10K SAS - Refurbished *Special Buy","description":"\u003cp\u003eRefurbished enterprise 1.8TB 10K SAS hard drive, a high-capacity 2.5-inch drive for SFF SAS bays in Dell PowerEdge and HPE ProLiant servers. Our refurbished enterprise SAS hard drives form the capacity tier of a server: previously deployed, tested, and sold by capacity, spindle speed and form factor rather than brand, since the manufacturer varies by lot. They run on any PERC, Smart Array or HBA with a SAS backplane, at whatever link speed the controller and backplane negotiate.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e1.8 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e2.5-inch SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e10,000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eSAS only: the drive needs a SAS controller (PERC, Smart Array or an HBA) and a SAS backplane, and it will not run from onboard SATA. A 3.5-inch bay takes it only in a 2.5-to-3.5 adapter carrier. Dell changed tray design between 13th gen and 14th gen, and HPE carriers are their own design, so we match the tray to the chassis you run. Link speed is whatever the controller and backplane negotiate. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl380-gen9-parts\"\u003eHPE ProLiant DL380 Gen9\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003ePick the 1.8TB 10K when a 2.5-inch chassis has to hold more data without moving to 3.5-inch nearline drives: file servers, VM datastores and backup staging in an 8-bay or 10-bay 1U. Against the 1.2TB it adds half again the space per bay at the same speed; against the 2.4TB it is the cheaper step. For random-write databases, choose a SAS SSD instead.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951246074055,"sku":"D-250149","price":85.9,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-2-4tb-10k-sas-refurbished-1","title":"Enterprise 2.4TB 10K SAS - Refurbished *Special Buy","description":"\u003cp\u003eRefurbished enterprise 2.4TB 10K SAS hard drive, the largest 2.5-inch 10K drive we stock, for SFF SAS bays in Dell PowerEdge and HPE ProLiant servers. Refurbished enterprise SAS hard drives are the capacity tier of a server, previously deployed and tested, and we sell them by capacity, spindle speed and form factor rather than by brand because the manufacturer varies by lot. They run on any PERC, Smart Array or HBA with a SAS backplane, at the link speed the controller and backplane negotiate.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e2.4 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e2.5-inch SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e10,000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis is a SAS drive, so it needs a hardware PERC, Smart Array or HBA and a SAS backplane; onboard SATA ports and SATA-only software RAID will not run it. In a chassis built with 3.5-inch bays it needs a 2.5-to-3.5 adapter carrier. Carriers do not cross over: Dell 13th gen trays differ from 14th to 16th gen trays, and HPE uses its own carriers, so we match the tray to your chassis. The drive runs at the link speed the controller and backplane negotiate. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r740xd-parts\"\u003eDell PowerEdge R740xd\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 2.4TB 10K is for 2.5-inch chassis that need the most capacity per bay, such as a 24-bay R740xd running file shares or VM storage. It holds twice the 1.2TB per bay: fewer drives, but longer rebuilds, so we quote RAID 6 or RAID 10 on large sets. For pure capacity, 3.5-inch nearline drives cost less per terabyte.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eTo boot from a volume above 2 TB, use UEFI and a GPT partition table. On PERC, clear any foreign configuration before adding the drive to a new virtual disk.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951246008519,"sku":"D-250151","price":522.0,"currency_code":"USD","in_stock":true}]},{"product_id":"idrac9-express-copy","title":"iDRAC9 Express","description":"","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951246270663,"sku":"RA-000001","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-10tb-3-5-sas-hard-drive","title":"Enterprise 10TB 3.5\" SAS Hard Drive *Special Buy","description":"\u003cp\u003eRefurbished enterprise 10TB 3.5-inch SAS hard drive, a 7,200 RPM nearline drive for LFF SAS bays in Dell PowerEdge and HPE ProLiant servers. Refurbished enterprise SAS hard drives are the capacity tier of a server: previously deployed, tested, and sold by capacity, spindle speed and form factor rather than by brand, because the manufacturer varies by lot. They run on any PERC, Smart Array or HBA with a SAS backplane, at the link speed the controller and backplane negotiate.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e10 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e3.5-inch LFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e7,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis 3.5-inch LFF drive needs a 3.5-inch bay; a 2.5-inch-only chassis cannot take it. It is SAS, so it needs a PERC, Smart Array or HBA with a SAS backplane, not onboard SATA. Dell 13th gen and 14th to 16th gen 3.5-inch trays differ, and HPE uses its own LFF carriers, so we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r540-parts\"\u003eDell PowerEdge R540\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 10TB is a capacity tier drive for file servers, video retention and backup targets in an LFF chassis such as the R540. We do not quote RAID 5 for large-capacity spinning disk arrays: a 10TB rebuild runs for many hours and a second failure in that window loses the array, so we quote RAID 6 or RAID 10. If a smaller array with faster rebuilds suits you better, the 6TB or 8TB is the alternative.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eTo boot from a volume above 2 TB, use UEFI and a GPT partition table. On PERC, clear any foreign configuration before adding the drive to a new virtual disk.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951248793799,"sku":"D-350104","price":314.4,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-3tb-3-5-sas-hard-drive","title":"Enterprise 3TB 3.5\" SAS Hard Drive *Reduced Price","description":"\u003cp\u003eRefurbished enterprise 3TB 3.5-inch SAS hard drive, a nearline LFF drive for 3.5-inch SAS bays in Dell PowerEdge and HPE ProLiant servers. Refurbished enterprise SAS hard drives are the capacity tier of a server: previously deployed, tested, and sold by capacity, spindle speed and form factor rather than by brand, because the manufacturer varies by lot. They run on any PERC, Smart Array or HBA with a SAS backplane, at the link speed the controller and backplane negotiate.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e3 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e3.5-inch LFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e7,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eIt needs a 3.5-inch LFF bay; servers configured only with 2.5-inch bays have no place for it. As a SAS drive it needs a hardware PERC, Smart Array or HBA and a SAS backplane. The carrier must match: Dell 13th gen LFF trays do not fit 14th to 16th gen bays, and HPE carriers are not interchangeable with Dell, so we match the tray to your server. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-t430-parts\"\u003eDell PowerEdge T430\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 3TB is mainly a like-for-like replacement for an existing 3TB array, or a low-cost drive for small file shares and tower servers such as the T430. Replacing with the same capacity keeps the virtual disk geometry simple. For a new build, the 4TB and 6TB cost little more and give more room per bay.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eAbove 2 TB, a boot volume needs UEFI and a GPT partition table; legacy BIOS mode cannot address the full drive. On PERC, clear any foreign configuration before adding the drive to a virtual disk.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951248924871,"sku":"D-350096","price":54.0,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-12tb-3-5-sas-hard-drive","title":"Enterprise 12TB 3.5\" SAS Hard Drive *Special Buy","description":"\u003cp\u003eRefurbished enterprise 12TB 3.5-inch SAS hard drive, a nearline capacity drive for LFF bays in Dell PowerEdge and HPE ProLiant servers. Refurbished enterprise SAS hard drives are the capacity tier of a server, previously deployed and tested, and we sell them by capacity, spindle speed and form factor rather than by brand because the manufacturer varies by lot. They run on any PERC, Smart Array or HBA with a SAS backplane, at the link speed the controller and backplane negotiate.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e12 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e3.5-inch LFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e7,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eBay first: this drive needs a 3.5-inch LFF bay; a 2.5-inch-only chassis cannot take it. Interface second: it is SAS, so it runs behind a PERC, Smart Array or HBA on a SAS backplane, not from onboard SATA. Dell 3.5-inch trays changed between 13th gen and 14th gen, and HPE LFF carriers are their own design, so we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl380-gen10-parts\"\u003eHPE ProLiant DL380 Gen10\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the 12TB SAS for backup repositories, surveillance archives and large file shares where the controller is already SAS. The 12TB SATA version costs less and runs on the same controllers; the SAS model adds the dual-port, full-duplex SAS link and its error handling. RAID 5 is off the table for us at this size, since a 12TB rebuild leaves the set exposed for most of a day; RAID 6 or RAID 10 is what we quote.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eTo boot from a volume above 2 TB, use UEFI and a GPT partition table. On PERC, clear any foreign configuration before adding the drive to a new virtual disk.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951249121479,"sku":"D-350106","price":452.8,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-16tb-3-5-sas-hard-drive","title":"Enterprise 16TB 3.5\" SAS Hard Drive *Special Buy","description":"\u003cp\u003eRefurbished enterprise 16TB 3.5-inch SAS hard drive, a high-capacity nearline drive for LFF bays in Dell PowerEdge and HPE ProLiant servers. Refurbished enterprise SAS hard drives are the capacity tier of a server: previously deployed, tested, and sold by capacity, spindle speed and form factor rather than by brand, because the manufacturer varies by lot. They run on any PERC, Smart Array or HBA with a SAS backplane, at the link speed the controller and backplane negotiate.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e16 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e3.5-inch LFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e7,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis 3.5-inch LFF drive needs a 3.5-inch bay; a 2.5-inch-only chassis cannot take it. It is SAS, so it needs a PERC, Smart Array or HBA with a SAS backplane, not onboard SATA. Dell 13th gen and 14th to 16th gen 3.5-inch trays differ, and HPE uses its own LFF carriers, so we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r750xs-parts\"\u003eDell PowerEdge R750xs\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 16TB suits backup targets, media libraries and long-retention archives where bay count is the limit. On 15th gen hosts such as the R750xs, note that the PERC H355 and H345 do RAID 0, 1 and 10 only; RAID 6 needs an H755 or H745. We do not build RAID 5 from drives this large, since rebuilds run long and a second failure ends the array. The 12TB is the alternative for smaller sets.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eTo boot from a volume above 2 TB, use UEFI and a GPT partition table. On PERC, clear any foreign configuration before adding the drive to a new virtual disk.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951248957639,"sku":"D-350107","price":584.4,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-18tb-3-5-sas-hard-drive","title":"Enterprise 18TB 3.5\" SAS Hard Drive *Special Buy","description":"\u003cp\u003eRefurbished enterprise 18TB 3.5-inch SAS hard drive, a nearline bulk-storage drive for LFF SAS bays in Dell PowerEdge and HPE ProLiant servers. Refurbished enterprise SAS hard drives are the capacity tier of a server, previously deployed and tested, and we sell them by capacity, spindle speed and form factor rather than by brand because the manufacturer varies by lot. They run on any PERC, Smart Array or HBA with a SAS backplane, at the link speed the controller and backplane negotiate.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e18 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e3.5-inch LFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e7,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eBay first: this drive needs a 3.5-inch LFF bay; a 2.5-inch-only chassis cannot take it. Interface second: it is SAS, so it runs behind a PERC, Smart Array or HBA on a SAS backplane, not from onboard SATA. Dell 3.5-inch trays changed between 13th gen and 14th gen, and HPE LFF carriers are their own design, so we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl380-gen10-plus-parts\"\u003eHPE ProLiant DL380 Gen10 Plus\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 18TB is for bulk retention: backup repositories, camera archives and cold file storage where terabytes per bay matter more than IOPS. Pair it with flash for anything latency-sensitive. RAID 5 is a poor bet at 18TB: one rebuild reads every remaining drive end to end for well over a day, so we quote RAID 6 or RAID 10. The 16TB or 20TB are the neighbouring sizes.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eTo boot from a volume above 2 TB, use UEFI and a GPT partition table. On PERC, clear any foreign configuration before adding the drive to a new virtual disk.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951249088711,"sku":"D-350108","price":833.6,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-6tb-3-5-sas-hard-drive","title":"Enterprise 6TB 3.5\" SAS Hard Drive *Special Buy","description":"\u003cp\u003eRefurbished enterprise 6TB 3.5-inch SAS hard drive, a nearline LFF drive for 3.5-inch SAS bays in Dell PowerEdge and HPE ProLiant servers. Refurbished enterprise SAS hard drives are the capacity tier of a server, previously deployed and tested, and we sell them by capacity, spindle speed and form factor rather than by brand because the manufacturer varies by lot. They run on any PERC, Smart Array or HBA with a SAS backplane, at the link speed the controller and backplane negotiate.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e6 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e3.5-inch LFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e7,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eBay first: this drive needs a 3.5-inch LFF bay; a 2.5-inch-only chassis cannot take it. Interface second: it is SAS, so it runs behind a PERC, Smart Array or HBA on a SAS backplane, not from onboard SATA. Dell 3.5-inch trays changed between 13th gen and 14th gen, and HPE LFF carriers are their own design, so we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl180-gen9-parts\"\u003eHPE ProLiant DL180 Gen9\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 6TB sits below the size where we rule out RAID 5, which makes it a good choice for mid-size file servers and backup targets on 12-bay storage servers. We still quote RAID 6 when the set is wide. Against the 4TB it adds half again the space per bay; the 8TB is the next step for more capacity. Keep hot data on SAS or NVMe flash.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eTo boot from a volume above 2 TB, use UEFI and a GPT partition table. On PERC, clear any foreign configuration before adding the drive to a new virtual disk.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951248990407,"sku":"D-350100","price":169.0,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-4tb-3-5-sas-hard-drive-1","title":"Enterprise 4TB 3.5\" SAS Hard Drive *Reduced Price","description":"\u003cp\u003eRefurbished enterprise 4TB 3.5-inch SAS hard drive, a mid-capacity nearline drive for LFF bays in Dell PowerEdge and HPE ProLiant servers. Our refurbished enterprise SAS hard drives form the capacity tier of a server: previously deployed, tested, and sold by capacity, spindle speed and form factor rather than brand, since the manufacturer varies by lot. They run on any PERC, Smart Array or HBA with a SAS backplane, at whatever link speed the controller and backplane negotiate.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e4 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e3.5-inch LFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e7,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis 3.5-inch LFF drive needs a 3.5-inch bay; a 2.5-inch-only chassis cannot take it. It is SAS, so it needs a PERC, Smart Array or HBA with a SAS backplane, not onboard SATA. Dell 13th gen and 14th to 16th gen 3.5-inch trays differ, and HPE uses its own LFF carriers, so we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r530-parts\"\u003eDell PowerEdge R530\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 4TB is a practical general-purpose LFF drive: file servers, small backup targets and mixed storage in an 8-bay R530 or similar. Rebuilds stay shorter than with 8TB and larger drives, which gives you more room in your RAID choice. For more capacity per bay, the 6TB or 8TB; for random-I\/O workloads, a SAS SSD is the right tool.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eTo boot from a volume above 2 TB, use UEFI and a GPT partition table. On PERC, clear any foreign configuration before adding the drive to a new virtual disk.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951249154247,"sku":"D-350097","price":79.8,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-8tb-3-5-sas-hard-drive","title":"Enterprise 8TB 3.5\" SAS Hard Drive *Special Buy","description":"\u003cp\u003eRefurbished enterprise 8TB 3.5-inch SAS hard drive, a nearline capacity drive for LFF SAS bays in Dell PowerEdge and HPE ProLiant servers. Refurbished enterprise SAS hard drives are the capacity tier of a server: previously deployed, tested, and sold by capacity, spindle speed and form factor rather than by brand, because the manufacturer varies by lot. They run on any PERC, Smart Array or HBA with a SAS backplane, at the link speed the controller and backplane negotiate.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e8 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e3.5-inch LFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e7,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eIt needs a 3.5-inch LFF bay; servers configured only with 2.5-inch bays have no place for it. As a SAS drive it needs a hardware PERC, Smart Array or HBA and a SAS backplane. The carrier must match: Dell 13th gen LFF trays do not fit 14th to 16th gen bays, and HPE carriers are not interchangeable with Dell, so we match the tray to your server. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r650-parts\"\u003eDell PowerEdge R650\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 8TB SAS is for file servers and backup targets on a SAS controller, for example a 15th gen R650 with four LFF bays. The 8TB SATA costs less on the same controllers. From 8TB up we do not quote RAID 5, since the rebuild window is long enough to risk a second failure; we quote RAID 6 or RAID 10. On 15th gen, RAID 6 needs a PERC H755 or H745, as the H355 and H345 do RAID 0, 1 and 10 only.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eTo boot from a volume above 2 TB, use UEFI and a GPT partition table. On PERC, clear any foreign configuration before adding the drive to a new virtual disk.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951249350855,"sku":"D-350102","price":182.8,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-12tb-3-5-sata-hard-drive","title":"Enterprise 12TB 3.5\" SATA Hard Drive *Special Buy","description":"\u003cp\u003eRefurbished enterprise 12TB 3.5-inch SATA hard drive, a nearline capacity drive for LFF bays in Dell PowerEdge and HPE ProLiant servers. Refurbished enterprise SATA hard drives are the low-cost capacity tier: 7,200 RPM nearline drives on a 6 Gb\/s SATA link, sold by capacity rather than brand because the manufacturer varies by lot. They run on SATA and SAS controllers alike, since SAS controllers and backplanes also accept SATA drives.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e12 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSATA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e3.5-inch LFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e7,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis is a 3.5-inch LFF SATA drive: it needs a 3.5-inch bay, and a 2.5-inch-only chassis cannot take it. SATA runs on SATA and SAS controllers and backplanes alike, including Dell S-series software RAID. Dell 13th gen and 14th to 16th gen 3.5-inch trays are different parts, and HPE uses its own LFF carriers, so we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r730xd-parts\"\u003eDell PowerEdge R730xd\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 12TB SATA is the low-cost way to fill an R730xd or similar LFF chassis with backup or archive capacity. The 12TB SAS costs more and adds the dual-port SAS link and its error handling; for a single-path backup target, SATA is usually enough. Avoid RAID 5 on 12TB drives: a rebuild runs most of a day with no redundancy left, so we quote RAID 6 or RAID 10.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eTo boot from a volume above 2 TB, use UEFI and a GPT partition table. On PERC, clear any foreign configuration before adding the drive to a new virtual disk.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951249383623,"sku":"D-350105","price":418.2,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-8tb-3-5-sata-hard-drive","title":"Enterprise 8TB 3.5\" SATA Hard Drive *Special Buy","description":"\u003cp\u003eRefurbished enterprise 8TB 3.5-inch SATA hard drive, an LFF nearline drive for tower and rack servers, Dell PowerEdge 13th to 16th gen and HPE ProLiant Gen9 to Gen10 Plus. Refurbished enterprise SATA hard drives are the low-cost capacity tier: 7,200 RPM nearline drives on a 6 Gb\/s SATA link, sold by capacity rather than brand because the manufacturer varies by lot. They run on SATA and SAS controllers alike, since SAS controllers and backplanes also accept SATA drives.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e8 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSATA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e3.5-inch LFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e7,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eIt needs a 3.5-inch LFF bay; servers built only with 2.5-inch bays cannot take it. As a SATA drive it runs on a PERC, Smart Array or HBA as well as onboard SATA, because SAS controllers and backplanes accept SATA drives. Dell 3.5-inch trays changed between 13th gen and 14th gen, and HPE LFF carriers are their own design, so we match the tray to your server. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-t340-parts\"\u003eDell PowerEdge T340\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 8TB SATA suits small-office towers like the T340 and budget backup targets where the controller may be onboard SATA or software RAID. The 8TB SAS needs a SAS controller and adds the SAS link; choose it if the server already runs a PERC or Smart Array with SAS drives. RAID 5 is not something we quote at 8TB, because the long rebuild invites a second failure; we quote RAID 6 or RAID 10, or RAID 1 on two drives.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eTo boot from a volume above 2 TB, use UEFI and a GPT partition table. On PERC, clear any foreign configuration before adding the drive to a new virtual disk.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951250038983,"sku":"D-350101","price":340.5,"currency_code":"USD","in_stock":true}]},{"product_id":"new-enterprise-960gb-sas-ssd-12gb-s","title":"NEW Samsung PM1643a 960GB SAS 12Gbps 2.5in SSD MZILT960HBHQ","description":"\u003cp\u003eNew Samsung 960GB 12 Gb\/s SAS SSD, a read-intensive PM1643a for the 2.5-inch SAS bays in Dell PowerEdge and HPE ProLiant servers. SAS SSDs are the enterprise flash tier for SAS backplanes: they use the same PERC, Smart Array and HBA controllers and the same bays as SAS hard drives, with the full-duplex SAS link and its error handling. They are the straightforward flash upgrade for an existing SAS array.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eMZILT960HBHQ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e960 GB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS 12 Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNAND\u003c\/th\u003e\n\u003ctd\u003eSamsung V-NAND TLC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEndurance\u003c\/th\u003e\n\u003ctd\u003e1 DWPD, 5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSequential read\/write\u003c\/th\u003e\n\u003ctd\u003e2,100 \/ 1,000 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRandom read\/write\u003c\/th\u003e\n\u003ctd\u003e380K \/ 40K IOPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower loss protection\u003c\/th\u003e\n\u003ctd\u003eYes, tantalum capacitors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis is a 12 Gb\/s SAS drive: it needs a SAS controller and SAS backplane, and a SATA-only controller cannot run it. It links at 12 Gb\/s on PERC, Smart Array and HBA controllers alike, including a 24G-capable PERC 12. In a 3.5-inch bay it needs a 2.5-to-3.5 adapter carrier. Dell 13th gen trays differ from 14th to 16th gen trays, and HPE uses its own carriers; we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl380-gen10-parts\"\u003eHPE ProLiant DL380 Gen10\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the 960GB PM1643a for a mirrored OS or hypervisor volume, or a small read-intensive datastore on a SAS array. It is the slowest writer of the line at 1,000 MB\/s and 40K IOPS; the 1.92TB and 3.84TB write faster. If the bay is SATA, or you want built-in AES-256, the Intel S4520 960GB fits; for write-heavy duty the S4620 960GB is the mixed-use pick.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951255904455,"sku":"D-0350155","price":580.5,"currency_code":"USD","in_stock":true}]},{"product_id":"perc-h740p-raid-controller-05fmy4-copy","title":"PERC H740p RAID Controller with 8GB Cache","description":"\u003cp\u003eRefurbished Dell PERC H740P Mini Mono with 8 GB NV cache, a RAID controller for the integrated mini PERC slot in Dell 14th gen PowerEdge servers. The PERC H740P belongs to Dell's PERC 10 family, built on the Broadcom SAS3508 RAID-on-chip with 8 GB of non-volatile cache. It is the production controller of the 14th gen PowerEdge line for write-heavy and transactional local storage.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e5FMY4, 0878M, GP6RN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003ePERC 10, Broadcom SAS3508\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCache\u003c\/th\u003e\n\u003ctd\u003e8 GB NV, battery-backed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003e12 Gb\/s SAS, 6 Gb\/s SATA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInternal ports\u003c\/th\u003e\n\u003ctd\u003e8 lanes, 2x4 internal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003ePCIe 3.1 x8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003eMini Mono\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRAID levels\u003c\/th\u003e\n\u003ctd\u003e0, 1, 5, 6, 10, 50, 60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe Mini Mono H740P drops into the dedicated mini PERC socket on the system board and does not use a PCIe slot; it will not fit a standard slot, and the PCIe adapter H740P will not fit the socket. It is a 14th gen part: 13th gen servers have no H740P support, and 15th and 16th gen servers moved to front-mount controllers. The battery must be connected for write-back cache. Backplane cables are chassis parts and stay with the server. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r740-parts\"\u003eDell PowerEdge R740\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe H740P is the production storage default for write-intensive or transactional workloads where local storage matters: SQL volumes, RAID 5 or 6 over SSDs, and VM datastores on the box. Its 8 GB NV cache is four times the 2 GB on the H730P, which still covers a light file server. If the hypervisor owns redundancy, choose the HBA330.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eAfter a swap, import the foreign configuration through HII or iDRAC so the virtual disks come back online. Enhanced HBA mode needs PERC 10 firmware 50.5.0-1750 or later.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951256395975,"sku":"RD-000010","price":72.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-r440-r540-r740xd2-dual-port-1gbe-lom","title":"Dell Dual-Port 1GbE OCP LOM","description":"\u003cp\u003eRefurbished Dell dual-port 1GbE LOM riser card, a copper gigabit mezzanine that fills the LOM riser slot in Dell PowerEdge servers. Dell's LOM riser card adds two network ports beside the two embedded 1GbE ports on PowerEdge servers that have no rNDC slot. It installs in the dedicated LOM riser slot, so the extra ports do not take a PCIe slot.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eBroadcom 5720\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePorts\u003c\/th\u003e\n\u003ctd\u003e2x 1GbE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eRJ45 1000Base-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003eLOM riser (mezzanine) card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eIt is a LOM riser card. It does not fit an rNDC slot, which takes a larger daughter card on a different connector, and it is not an OCP NIC 3.0 card despite the OCP in the listing name. Only one LOM riser card installs per server, and the ports run standard 1000Base-T on Cat5e or better. Confirm the riser card option for your chassis with the service tag, because these cards are matched to the server model. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r440-parts\"\u003eDell PowerEdge R440\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003ePick the 1GbE LOM riser card to separate iDRAC-adjacent management, backup or a DMZ segment onto their own physical ports, giving the server four gigabit ports in total. It is not a performance upgrade: for vMotion, storage or uplinks we quote the 10Gb SFP+ or 10GBase-T LOM riser card. If you need more than four gigabit ports, add an Intel i350 PCIe adapter.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Wholesale Servers","offers":[{"title":"Default Title","offer_id":45951268487367,"sku":"N-000023","price":196.5,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-r440-r540-r740xd2-dual-port-10gb-sfp-lom-1","title":"Dell Dual-Port 10Gb SFP+ OCP LOM","description":"\u003cp\u003eRefurbished Dell dual-port 10Gb SFP+ LOM riser card, a fiber or DAC 10GbE mezzanine for the LOM riser slot in Dell PowerEdge servers. Dell's LOM riser card adds two network ports beside the two embedded 1GbE ports on PowerEdge servers that have no rNDC slot. It installs in the dedicated LOM riser slot, so the extra ports do not take a PCIe slot.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePorts\u003c\/th\u003e\n\u003ctd\u003e2x 10GbE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eSFP+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003eLOM riser (mezzanine) card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eTreat this as a LOM riser card, not an rNDC: servers with a full rNDC slot take a larger card on another connector, and the OCP in the product name does not make it an OCP NIC 3.0 card. A server takes one LOM riser card. The two SFP+ cages need 10Gb SFP+ optics or DAC cables; optics and DACs are sold separately. Check the riser card option against your service tag, since the LOM riser cards are not interchangeable across every chassis. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r740xd2-parts\"\u003eDell PowerEdge R740xd2\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThis is the card for two-port 10GbE uplinks to an SFP+ switch fabric: storage replication on the large-drive chassis, vMotion, or a second iSCSI path, all without giving up a PCIe slot. On a copper 10GbE network the 10GBase-T LOM riser card avoids buying optics. If you need four 10GbE ports, pair it with an Intel X710 PCIe adapter.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Wholesale Servers","offers":[{"title":"Default Title","offer_id":45951268913351,"sku":"N-000025","price":301.5,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-14th-15th-gen-a11-drop-in-rackmount-sliding-rails","title":"Dell PowerEdge 1U A11 Drop-in Sliding Rail Kit","description":"\u003cp\u003eRefurbished Dell A11 combo rail kit, the 1U drop-in and stab-in tool-less rail for Dell 14th gen, 15th gen and 16th gen PowerEdge servers that carry rail identifier A11. Dell matches rails to servers by rail identifier, so the A or B code is what has to fit your chassis, not the server name. Sliding rails pull the server out of the rack for service, while static rails fit more rack types but hold the chassis in place.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8Y3D7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCombo drop-in and stab-in, generic tool-less, rail identifier A11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTool-less; drop-in in square and unthreaded holes, stab-in in threaded holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack compatibility\u003c\/th\u003e\n\u003ctd\u003e4-post square, unthreaded round, threaded round (10-32 hole)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable management arm\u003c\/th\u003e\n\u003ctd\u003eSupported, CMA or strain relief bar, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe A11 is Dell's generic tool-less combo rail: in square-hole and unthreaded round-hole racks the server drops in and slides like a ReadyRails sliding kit; in threaded round-hole racks the inner members stab in like a static kit, and the holes must be 10-32 thread. It is a 4-post rail with no 2-post mount. It supports a CMA or strain relief bar, which has to come off before an inner member does. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r650-parts\"\u003eDell PowerEdge R650\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the A11 when one kit has to cover a mixed rack estate: it gives you the service slide in square and round racks and still installs in threaded racks without an adapter. If every rack is square-hole and you want the ReadyRails II latches, the A15 is the alternative on the newer 1U chassis. Fair warning: in a threaded rack the A11 is static, so plan to unrack for service there.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951284248775,"sku":"108200-BLD","price":158.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-poweredge-r440-r450-r650-gen-a11-drop-in-sliding-rails-608940.png?v=1765539707"},{"product_id":"idrac9-x5-15th-gen-enterprise-license-copy","title":"iDRAC9 x5 Enterprise License","description":"\u003cp\u003eTHIS LICENSE IS FOR SERVER BUILDS ONLY - RETAIL LICENSE CAN BE PURCHASED HERE. \u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951284871367,"sku":"RA-000007","price":113.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/idrac9-x5-enterprise-license-281031.png?v=1765539647"},{"product_id":"enterprise-800gb-sas-ssd-12gb-s","title":"Enterprise 800GB SAS SSD 12Gb\/s - Refurbished *Special Buy","description":"\u003cp\u003eRefurbished enterprise 800GB SAS SSD, a 12 Gb\/s flash drive for 2.5-inch SAS bays in Dell 13th to 16th gen PowerEdge and HPE Gen9 to Gen10 Plus ProLiant servers. Refurbished SAS SSDs are previously deployed enterprise flash drives, tested and sold by capacity and interface because the manufacturer and model vary by lot. They give a SAS array flash latency at a fraction of new-drive cost, on any SAS-capable PERC, Smart Array or HBA.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e800 GB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS 12 Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e2.5-inch SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis 2.5-inch SAS SSD needs a SAS controller and SAS backplane, the same ones that run SAS hard drives; SATA-only ports and NVMe-only bays cannot run it. Expect 12 Gb\/s on 12 Gb\/s PERC and Smart Array controllers and a negotiated lower rate on older SAS hardware. A 3.5-inch bay needs a 2.5-to-3.5 adapter carrier. Dell trays for 13th gen and for 14th to 16th gen are different parts, HPE carriers are their own, and we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r730xd-parts\"\u003eDell PowerEdge R730xd\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 800GB suits caching, log volumes and small VM datastores where a 10K spindle is too slow and the budget is tight. There is no New 800GB in our range; if you want an unused drive with full service life, the New 960GB SAS SSD is the nearest capacity. Endurance and model vary by lot, so do not plan on a published DWPD figure.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951321112775,"sku":"D-250267","price":227.6,"currency_code":"USD","in_stock":true}]},{"product_id":"enterprise-20tb-7-2k-3-5-12gb-s-sas-hard-drive-hp","title":"Enterprise 20TB 3.5\" SAS Hard Drive","description":"\u003cp\u003eRefurbished enterprise 20TB 3.5-inch SAS hard drive, a very high-capacity nearline drive for LFF bays in Dell PowerEdge and HPE ProLiant servers. Our refurbished enterprise SAS hard drives form the capacity tier of a server: previously deployed, tested, and sold by capacity, spindle speed and form factor rather than brand, since the manufacturer varies by lot. They run on any PERC, Smart Array or HBA with a SAS backplane, at whatever link speed the controller and backplane negotiate.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e20 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e3.5-inch LFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle speed\u003c\/th\u003e\n\u003ctd\u003e7,200 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis 3.5-inch LFF drive needs a 3.5-inch bay; a 2.5-inch-only chassis cannot take it. It is SAS, so it needs a PERC, Smart Array or HBA with a SAS backplane, not onboard SATA. Dell 13th gen and 14th to 16th gen 3.5-inch trays differ, and HPE uses its own LFF carriers, so we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r760xs-parts\"\u003eDell PowerEdge R760xs\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 20TB is for archive and backup tiers where you want the fewest drives for the space, for example a 16th gen R760xs storage build. Large-capacity spinning arrays are not a RAID 5 job in our quotes: rebuilding a 20TB member takes more than a day, so we quote RAID 6 or RAID 10. The 24TB is the next step up.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eTo boot from a volume above 2 TB, use UEFI and a GPT partition table. On PERC, clear any foreign configuration before adding the drive to a new virtual disk.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951329861831,"sku":"D-350153","price":1053.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-r450-r650xs-boss-card-with-2x-240gb-m-2","title":"Dell BOSS-S1 Card Kit with 2x 240GB M.2 SSD","description":"\u003cp\u003eRefurbished Dell BOSS-S1 2x 240GB kit, a compact hypervisor boot mirror for a PCIe slot in Dell 14th and 15th gen PowerEdge servers. Dell BOSS mirrors two M.2 SATA SSDs in hardware RAID 1 on a dedicated controller, so the operating system boots off the front bays and does not use a PERC channel. Dell supports one virtual disk per card, so the pair is the boot volume and nothing else.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e51CN2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBOSS-S1 boot controller kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrives\u003c\/th\u003e\n\u003ctd\u003e2x 240GB M.2 SATA SSD, 80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRAID\u003c\/th\u003e\n\u003ctd\u003eHardware RAID 1 or non-RAID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003ePCIe x8 connector, Gen 2 x2 lanes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003ePCIe adapter card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eBOSS-S1 is a PCIe adapter holding two 80mm M.2 SATA SSDs; it does not run NVMe M.2. Dell supports RAID 1 or non-RAID, no RAID 0, one virtual disk. There are no drive LEDs and no hot-plug; a drive swap means powering down. Some 15th gen chassis take the S1 as an integrated-slot module, so confirm yours takes the adapter form. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r440-parts\"\u003eDell PowerEdge R440\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003ePick the 240GB pair for a hypervisor boot mirror: ESXi or a Hyper-V host keeps its virtual machines on the data array, so the boot volume never needs more. Step up to the 480GB kit when Windows Server runs on bare metal. Against two front-bay SSDs, BOSS gives back both bays and the PERC channel. On 15th gen chassis with a rear BOSS bay, BOSS-S2 adds drive hot-plug.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eCreate the RAID 1 virtual disk in the BOSS-S1 configuration utility before the OS install and set it first in UEFI boot order. It always spans the full mirror; Dell does not support a smaller size.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951333892295,"sku":"BOSS-000010","price":209.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/s-l1600_e69cbd89-b1ad-4708-9528-91eb198ba6ef.webp?v=1781697383"},{"product_id":"dell-r450-r650xs-boss-card-with-2x-480gb-m-2","title":"Dell BOSS-S1 Card Kit with 2x 480GB M.2 SSD","description":"\u003cp\u003eRefurbished Dell BOSS-S1 2x 480GB kit, a mid-size operating system mirror for a PCIe slot in Dell 14th and 15th gen PowerEdge servers. Dell BOSS mirrors two M.2 SATA SSDs in hardware RAID 1 on a dedicated controller, so the operating system boots off the front bays and does not use a PERC channel. Dell supports one virtual disk per card, so the pair is the boot volume and nothing else.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e51CN2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBOSS-S1 boot controller kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrives\u003c\/th\u003e\n\u003ctd\u003e2x 480GB M.2 SATA SSD, 80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRAID\u003c\/th\u003e\n\u003ctd\u003eHardware RAID 1 or non-RAID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003ePCIe x8 connector, Gen 2 x2 lanes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003ePCIe adapter card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eBOSS-S1 is a PCIe adapter holding two 80mm M.2 SATA SSDs; it does not run NVMe M.2. Dell supports RAID 1 or non-RAID, no RAID 0, one virtual disk. There are no drive LEDs and no hot-plug; a drive swap means powering down. Some 15th gen chassis take the S1 as an integrated-slot module, so confirm yours takes the adapter form. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r640-parts\"\u003eDell PowerEdge R640\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 480GB pair is for Windows Server on bare metal with local logs, page file and update cache on the boot volume, or a Linux root with room under \/var and \/opt. If the box only boots ESXi or Hyper-V, the 240GB kit does the same job. If the root also carries container images or long log retention, take the 1TB kit. Either way the front bays stay free for data.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eBuild the mirror in the BOSS-S1 configuration utility, install the OS to that one virtual disk, and set it first in UEFI boot order. It always spans the full 480GB mirror.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951339462855,"sku":"BOSS-000011","price":1029.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/s-l1600_e69cbd89-b1ad-4708-9528-91eb198ba6ef.webp?v=1781697383"},{"product_id":"enterprise-1-92tb-sas-ssd-12gb-s-refurbished","title":"Enterprise 1.92TB SAS SSD 12Gb\/s - Refurbished *Special Buy","description":"\u003cp\u003eRefurbished enterprise 1.92TB SAS SSD, a 2.5-inch flash drive for database and VM volumes in the SAS bays of Dell 13th to 16th gen PowerEdge and HPE Gen9 to Gen10 Plus ProLiant servers. Refurbished SAS SSDs are previously deployed enterprise flash drives, tested and sold by capacity and interface because the manufacturer and model vary by lot. They give a SAS array flash latency at a fraction of new-drive cost, on any SAS-capable PERC, Smart Array or HBA.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVaries by lot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e1.92 TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eSAS 12 Gb\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e2.5-inch SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis 2.5-inch SAS SSD needs a SAS controller and SAS backplane, the same ones that run SAS hard drives; SATA-only ports and NVMe-only bays cannot run it. Expect 12 Gb\/s on 12 Gb\/s PERC and Smart Array controllers and a negotiated lower rate on older SAS hardware. A 3.5-inch bay needs a 2.5-to-3.5 adapter carrier. Dell trays for 13th gen and for 14th to 16th gen are different parts, HPE carriers are their own, and we match the tray to your chassis. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r440-parts\"\u003eDell PowerEdge R440\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose it when cost per terabyte of flash decides: database and mixed VM volumes on a SAS array, at well under the New 1.92TB, which is the pick if you want an unused drive with full service life. Endurance and model vary by lot and are not rated, so write-heavy logging belongs on a branded SAS SSD with a published DWPD figure.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Various","offers":[{"title":"Default Title","offer_id":45951388680391,"sku":"D-250155","price":625.9,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-boss-card-2x-1tb-m-2-ssd","title":"Dell BOSS-S1 Card Kit with 2x 1TB M.2 SSD","description":"\u003cp\u003eRefurbished Dell BOSS-S1 2x 1TB kit, the high-capacity boot mirror for a PCIe slot in Dell 14th and 15th gen PowerEdge servers. Dell BOSS mirrors two M.2 SATA SSDs in hardware RAID 1 on a dedicated controller, so the operating system boots off the front bays and does not use a PERC channel. Dell supports one virtual disk per card, so the pair is the boot volume and nothing else.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e51CN2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBOSS-S1 boot controller kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrives\u003c\/th\u003e\n\u003ctd\u003e2x 1TB M.2 SATA SSD, 80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRAID\u003c\/th\u003e\n\u003ctd\u003eHardware RAID 1 or non-RAID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003ePCIe x8 connector, Gen 2 x2 lanes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003ePCIe adapter card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eBOSS-S1 is a PCIe adapter holding two 80mm M.2 SATA SSDs; it does not run NVMe M.2. Dell supports RAID 1 or non-RAID, no RAID 0, one virtual disk. There are no drive LEDs and no hot-plug; a drive swap means powering down. Some 15th gen chassis take the S1 as an integrated-slot module, so confirm yours takes the adapter form. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r740-parts\"\u003eDell PowerEdge R740\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 1TB pair suits a Linux root that also holds container images, a local package mirror or long log retention, or Windows Server with large crash dumps and application data on the boot volume. For hypervisor boot alone, the 240GB kit does the same job. Fair warning: Dell's BOSS-S1 drive list names 240GB and 480GB SSDs, so if a support contract requires Dell-listed drives, take the 480GB kit.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951569526983,"sku":"BOSS-000012","price":1351.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-boss-card-with-2x-1tb-m2-ssds-high-capacity-boot-optimization-for-14th-gen-poweredge-servers-449248.png?v=1781697553"},{"product_id":"dell-broadcom-57810s-2x-10gbe-pcie","title":"Dell Broadcom 57810S 2x 10GbE PCIe","description":"\u003cp\u003eRefurbished Dell Broadcom 57810S dual-port 10GBase-T, a PCIe converged network adapter for a PCIe slot in Dell PowerEdge servers. Dell-branded Intel and Broadcom server NICs are sold under Dell part numbers for PowerEdge servers and take Dell's own firmware update packages. They add 10GbE ports through a standard PCIe slot, beside the onboard 1GbE LOM.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eW1GCR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eBroadcom 57810S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePorts\u003c\/th\u003e\n\u003ctd\u003e2x 10GbE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eRJ45 10GBase-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003ePCIe full height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003ePCIe 2.0 x8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOffloads\u003c\/th\u003e\n\u003ctd\u003eiSCSI, FCoE, NPAR, SR-IOV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBoot support\u003c\/th\u003e\n\u003ctd\u003ePXE, iSCSI boot, FCoE boot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eW1GCR is the full-height bracket build of this card. Check the slot height in your riser before ordering: a half-height slot needs the card on a low-profile bracket, and the bracket is not part of the PCB. The card is PCIe 2.0 x8, so it runs at Gen2 speed in a Gen4 slot and needs an x8 electrical slot for full throughput. The RJ45 ports run 10GBase-T to 100 m on CAT6a. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r350-parts\"\u003eDell PowerEdge R350\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the 57810S 10GBase-T when copper 10GbE has to carry iSCSI or FCoE storage with hardware offload, or when NPAR is wanted to split each port for hypervisor traffic. For plain copper 10GbE on a newer bus, the Intel X550 or X540-T2 is simpler. For fiber or DAC uplinks, the Intel X710-DA2 or the Broadcom 57810S SFP+ card fits better.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eNPAR partitions and the iSCSI or FCoE personality are set per port in the card's device settings in System Setup. The 57810S line was later sold under the QLogic and Marvell FastLinQ names; Dell firmware packages cover all of them.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951595282631,"sku":"N-000033","price":19.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-broadcom-57810s-2x-10gbe-pcie-8917404.webp?v=1765540092"},{"product_id":"dell-broadcom-57810s-2x-10gb-sfp-pcie","title":"Dell Broadcom 57810S 2x 10Gb SFP PCIe","description":"\u003cp\u003eRefurbished Dell Broadcom 57810S dual-port 10GbE SFP+, a low-profile PCIe converged network adapter for a half-height slot in Dell PowerEdge servers. Dell-branded Intel and Broadcom server NICs are sold under Dell part numbers for PowerEdge servers and take Dell's own firmware update packages. They add 10GbE ports through a standard PCIe slot alongside the onboard 1GbE LOM.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eY40PH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eBroadcom 57810S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePorts\u003c\/th\u003e\n\u003ctd\u003e2x 10GbE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eSFP+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003ePCIe low profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003ePCIe 2.0 x8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOffloads\u003c\/th\u003e\n\u003ctd\u003eiSCSI, FCoE, NPAR, SR-IOV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBoot support\u003c\/th\u003e\n\u003ctd\u003ePXE, iSCSI boot, FCoE boot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eY40PH is the low-profile bracket build; Dell's full-height build of the same card is N20KJ. The low-profile bracket suits the half-height rear slots on the Dell PowerEdge R350 and the riser slots on the Dell PowerEdge R6515. The card is PCIe 2.0 x8 and runs at Gen2 speed in a Gen4 slot. The two SFP+ cages take 10GbE optics or DAC cables; optics and DACs are sold separately. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r350-parts\"\u003eDell PowerEdge R350\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the 57810S SFP+ when fiber or DAC 10GbE has to carry iSCSI or FCoE storage with full hardware offload, or when NPAR is needed to split each port into partitions. For general 10GbE SFP+ uplinks on a PCIe 3.0 bus, the Intel X710-DA2 is the newer card. On copper switch ports, the Broadcom 57810S 10GBase-T or Intel X550 avoids buying optics.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eNPAR partitions and the iSCSI or FCoE personality are configured per port in System Setup device settings. FCoE also needs DCB on the upstream switch ports.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951595217095,"sku":"N-000034","price":15.3,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-intel-x540-t2-2x-10gbe-pcie","title":"Dell Intel X540-T2 2x 10GbE PCIe","description":"\u003cp\u003eRefurbished Dell Intel X540-T2 dual-port 10GBase-T, a low-profile PCIe converged network adapter for a half-height slot in Dell PowerEdge servers. Dell-branded Intel and Broadcom server NICs are sold under Dell part numbers for PowerEdge servers and take Dell's own firmware update packages. These cards add 10GbE ports through a standard PCIe slot, beside the onboard 1GbE LOM.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e3DFV8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eIntel X540\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePorts\u003c\/th\u003e\n\u003ctd\u003e2x 10GbE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eRJ45 10GBase-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003ePCIe low profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003ePCIe 2.1 x8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOffloads\u003c\/th\u003e\n\u003ctd\u003eSR-IOV, VMDq\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBoot support\u003c\/th\u003e\n\u003ctd\u003eiSCSI boot, FCoE boot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003e3DFV8 is the low-profile bracket build, the right height for the half-height rear slots on the Dell PowerEdge R350 and the low-profile riser slots on the Dell PowerEdge R6515. It is a PCIe 2.1 x8 card, so it runs at Gen2 speed in a Gen4 slot and wants an x8 electrical slot. The RJ45 ports run 10GBase-T to 100 m on CAT6a and negotiate down to 1GbE on older switch ports. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r6515-parts\"\u003eDell PowerEdge R6515\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe X540-T2 is the budget way to put two copper 10GbE ports on existing CAT6a cabling, with SR-IOV and VMDq for virtualization on the mature ixgbe driver. The Intel X550 is the newer copper choice with a PCIe 3.0 bus and lower power draw. If you need hardware iSCSI or FCoE offload, or NPAR, the Broadcom 57810S 10GBase-T card is the alternative.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951595249863,"sku":"N-000035","price":36.0,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/wholesaleservers.com\/collections\/dell-poweredge-r6515-parts.oembed","provider":"Wholesale Servers","version":"1.0","type":"link"}