{"title":"Rails, Bezels and Accessories","description":null,"products":[{"product_id":"dell-1u-a7-ready-rails-ii-sliding-rail-kit-r430-r630-r640","title":"Dell PowerEdge 1U A7 ReadyRails II Sliding Rail Kit","description":"\u003cp\u003eRefurbished Dell A7 ReadyRails II sliding rail kit, the 1U tool-less rail for Dell 13th gen and 14th gen PowerEdge rack servers that carry rail identifier A7. Dell matches rails to servers by rail identifier, so the A or B code is what has to fit your chassis, not the server name. Sliding rails pull the server out of the rack for service, while static rails fit more rack types but hold the chassis in place.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e81WCD (also 9D83F, 6RTCR, CWJ0X)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSliding, ReadyRails II, rail identifier A7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTool-less in square and unthreaded round holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack compatibility\u003c\/th\u003e\n\u003ctd\u003e4-post square, unthreaded round, threaded round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable management arm\u003c\/th\u003e\n\u003ctd\u003eSupported, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe A7 is a 1U ReadyRails II sliding kit for 4-post racks. It drops into square-hole and unthreaded round-hole racks without tools; threaded round-hole racks take a minor conversion and the mounting screws are not in the kit. It does not mount in 2-post racks, so a telco rack needs the static A8 instead. A Dell CMA attaches at the rear once the server is seated. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r640-parts\"\u003eDell PowerEdge R640\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the A7 when the server will be serviced in the rack: it slides the chassis fully forward so you can lift the lid without unracking. If the rack is 2-post or the server never moves once installed, the stab-in static A8 fits more racks for less. Fair warning: match the identifier printed on the rail, not the server model on the box.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951248302279,"sku":"49303-BLD","price":32.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-1u-a7-ready-rails-ii-sliding-rail-kit-r430r630r640-793006.png?v=1765539631"},{"product_id":"dell-13th-gen-tpm-copy","title":"Dell 13th Gen 1.2 TPM","description":"\u003cp\u003eRefurbished Dell 7HGKK TPM 1.2 module, a plug-in Trusted Platform Module for Dell 13th gen PowerEdge system boards. A Dell TPM is a plug-in module that generates and stores keys, passwords and certificates in hardware, the anchor for BitLocker and pre-boot measurements. Dell states that once installed it is cryptographically bound to that system board and cannot be moved to another server.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e7HGKK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePlug-in TPM module, FIPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTPM version\u003c\/th\u003e\n\u003ctd\u003e1.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e13th gen TPM connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003e7HGKK is the 13th gen TPM 1.2 FIPS module; Dell support identifies it as 1.2, though some resale listings mislabel it as 2.0. It fits the 13th gen connector only; 14th gen boards take FMYG3 and 15th gen boards take a different module. The operating system must support TPM 1.2, and the TPM menu appears in System Setup only once a module is installed. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r430-parts\"\u003eDell PowerEdge R430\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose TPM 1.2 to match a 13th gen fleet already provisioned on 1.2, or an OS image built for it. For a new BitLocker or Intel TXT deployment, the 13th gen TPM 2.0 module, K98XH, is the current standard and what most audits ask for. Fair warning: the binding is one-way, so choose the version before you install.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eTPM Security is off by default; turn it on in System Setup after installing the module. For Intel TXT, Dell requires virtualization technology and TPM Security with pre-boot measurements enabled. Clearing the TPM erases every key in it, so back up BitLocker recovery keys first.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951262621895,"sku":"TPM-004","price":49.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-13th-gen-trusted-platform-module-20-tpm-r9x21-133046.jpg?v=1765539671"},{"product_id":"hp-dl380-dl560-g9-g10-lff-sliding-rails","title":"HPE 2U Sliding Rail Kit 733662-B21","description":"\u003cp\u003eRefurbished HPE 733662-B21 2U LFF Easy Install rail kit, the tool-less sliding rail for large form factor 2U chassis in HPE ProLiant Gen9 and Gen10 servers. HPE matches rail kits to chassis height and depth, so 1U, 2U and 4U kits, and the SFF and LFF versions of one height, are separate parts. Sliding rails let the server pull forward for service, and the cable management arm is usually a separate option.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e733662-B21 (spare 878413-001)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSliding, Easy Install, 2U LFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTool-less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack compatibility\u003c\/th\u003e\n\u003ctd\u003e19-inch 4-post racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable management arm\u003c\/th\u003e\n\u003ctd\u003eOptional, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003eLFF (3.5-inch) chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eHPE names this the 2U LFF Easy Install Rail Kit and spares it as 878413-001, rack mounting 2U large form factor. It fits the 3.5-inch 2U chassis, which sit deeper than the SFF versions; a 2.5-inch chassis takes 733660-B21. HPE also pairs this kit with the four-socket 2U chassis of the same generation, which has no LFF bays but shares the depth. It mounts in 19-inch 4-post racks and accepts the optional 2U cable management arm. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl380-gen10-parts\"\u003eHPE ProLiant DL380 Gen10\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose this kit for any tagged 2U LFF server, and for the four-socket 2U chassis HPE lists it against. If your chassis is SFF, the shorter kit is the right one. Fair warning: on the 12-bay LFF chassis the rear drive cage adds weight at the back; seat the rails fully and latch the CMA before loading drives, or the first service pull will fight you.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":45951271207111,"sku":"DL380LFF-SLIDING-BLD","price":50.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/hp-dl380-dl560-g9g10-lff-sliding-rails-595892.png?v=1765539683"},{"product_id":"dell-poweredge-emc-r940-3u-server-front-bezel","title":"Dell PowerEdge EMC 3U LCD Server Front Bezel","description":"\u003cp\u003eRefurbished Dell V8F04 3U LCD front bezel, the keyed bezel with a status display for the Dell 14th gen PowerEdge R940 four-socket server. A Dell front bezel covers the drive bays and, on locking models, keeps hands off hot-swap drives until someone with the key opens it. Bezels are cut per chassis height and per server generation, so match both before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eV8F04\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eLCD front bezel, 3U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e3U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003eLCD status panel in the bezel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLock\u003c\/th\u003e\n\u003ctd\u003eKeyed lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe R940 is a 3U chassis and takes its own bezel; the 1U and 2U bezels of the same generation do not span it. This is the LCD version: on the 14th gen rack servers Dell builds the status LCD into the bezel rather than the chassis, so the display and its buttons come and go with the bezel. It connects through contacts behind the bezel and needs the chassis front intact to seat and lock. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r940-parts\"\u003eDell PowerEdge R940\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the LCD bezel when the R940 lives where someone reads status at the rack: the panel shows the service tag, error messages and the system ID without a laptop. If the server is managed entirely through the remote controller, a plain bezel covers the drives for less. Fair warning: because the LCD rides in the bezel on this generation, a missing bezel also means no front-panel display at all.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951271698631,"sku":"129637-BLD","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-poweredge-emc-3u-lcd-server-front-bezel-254521.jpg?v=1765539687"},{"product_id":"dell-poweredge-r530-r730-r730xd-security-bezel","title":"Dell PowerEdge 13th Gen 2U Security Front Bezel","description":"\u003cp\u003eRefurbished Dell 8RFGM 2U security bezel, the locking front bezel for Dell 13th gen PowerEdge 2U rack servers. A Dell front bezel covers the drive bays and, on locking models, keeps hands off hot-swap drives until someone with the key opens it. Bezels are cut per chassis height and per server generation, so match both before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8RFGM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSecurity front bezel, 2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLock\u003c\/th\u003e\n\u003ctd\u003eKeyed lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis bezel fits the 13th gen 2U chassis front; it does not fit the 14th gen 2U servers, which take 8CW5K or the LCD 12Y5P, and it does not fit 1U chassis. It is the plain security version with a keyed lock and no display. The lock engages the chassis ear latch, so the ears must be intact. The 2U storage chassis of this generation shares the same front and takes the same bezel. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r730-parts\"\u003eDell PowerEdge R730\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose this bezel to lock the drive bays on a 13th gen 2U server in a shared or colocation rack, where a pulled drive is the easy mistake. If you only want the face covered and the server sits in a locked cabinet, any intact bezel from the same generation does the job. Fair warning: keys are often missing on used bezels; we confirm the lock works on the unit we ship.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951271665863,"sku":"3521-BLD","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-poweredge-13th-gen-2u-security-front-bezel-907247.jpg?v=1765539688"},{"product_id":"dell-r650-r660-a15-sliding-rail-kit","title":"Dell PowerEdge 1U A15 Sliding Rail Kit","description":"\u003cp\u003eRefurbished Dell A15 ReadyRails II sliding rail kit, the 1U tool-less rail for Dell 15th gen and 16th gen PowerEdge servers that carry rail identifier A15. Dell matches rails to servers by rail identifier, so the A or B code is what has to fit your chassis, not the server name. Sliding rails pull the server out of the rack for service, while static rails fit more rack types but hold the chassis in place.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eC8D0W (Dell 770-BECM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSliding, ReadyRails II, rail identifier A15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTool-less in square and unthreaded round holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack compatibility\u003c\/th\u003e\n\u003ctd\u003e4-post square, unthreaded round, threaded round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable management arm\u003c\/th\u003e\n\u003ctd\u003eSupported, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe A15 is the ReadyRails II sliding kit Dell orders as 770-BECM for its current 1U two-socket chassis. It mounts tool-less in square-hole and unthreaded round-hole 4-post racks; threaded round-hole racks need a minor conversion, your own screws, and a screw head no wider than 10 mm. It has no 2-post mount. A Dell CMA attaches at the rear, and the depth range with the CMA fitted is shorter than without, so check cabinet depth before adding one. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r650-parts\"\u003eDell PowerEdge R650\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the A15 when you want the ReadyRails II latches and a full service slide on a 15th gen or 16th gen 1U server in a standard 4-post cabinet. If the same server has to go into a threaded or mixed rack estate, the A11 combo kit covers more rack types with one part. Fair warning: the A15 does not fit the previous 1U chassis even though the servers look alike from the front; those take the A7 or A11.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951274156231,"sku":"R-000017","price":80.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-poweredge-r620-1u-a7-server-rackmount-ready-rails-ii-sliding-rail-kit-081wcd-81wcd-280728.png?v=1765539655"},{"product_id":"dell-14th-15th-gen-a11-drop-in-rackmount-sliding-rails","title":"Dell PowerEdge 1U A11 Drop-in Sliding Rail Kit","description":"\u003cp\u003eRefurbished Dell A11 combo rail kit, the 1U drop-in and stab-in tool-less rail for Dell 14th gen, 15th gen and 16th gen PowerEdge servers that carry rail identifier A11. Dell matches rails to servers by rail identifier, so the A or B code is what has to fit your chassis, not the server name. Sliding rails pull the server out of the rack for service, while static rails fit more rack types but hold the chassis in place.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8Y3D7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCombo drop-in and stab-in, generic tool-less, rail identifier A11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTool-less; drop-in in square and unthreaded holes, stab-in in threaded holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack compatibility\u003c\/th\u003e\n\u003ctd\u003e4-post square, unthreaded round, threaded round (10-32 hole)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable management arm\u003c\/th\u003e\n\u003ctd\u003eSupported, CMA or strain relief bar, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe A11 is Dell's generic tool-less combo rail: in square-hole and unthreaded round-hole racks the server drops in and slides like a ReadyRails sliding kit; in threaded round-hole racks the inner members stab in like a static kit, and the holes must be 10-32 thread. It is a 4-post rail with no 2-post mount. It supports a CMA or strain relief bar, which has to come off before an inner member does. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r650-parts\"\u003eDell PowerEdge R650\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the A11 when one kit has to cover a mixed rack estate: it gives you the service slide in square and round racks and still installs in threaded racks without an adapter. If every rack is square-hole and you want the ReadyRails II latches, the A15 is the alternative on the newer 1U chassis. Fair warning: in a threaded rack the A11 is static, so plan to unrack for service there.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951284248775,"sku":"108200-BLD","price":158.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-poweredge-r440-r450-r650-gen-a11-drop-in-sliding-rails-608940.png?v=1765539707"},{"product_id":"dell-14th-gen-2-0-tpm","title":"Dell 14th Gen 2.0 TPM","description":"\u003cp\u003eRefurbished Dell FMYG3 TPM 2.0 module, the plug-in TPM for Dell 14th gen PowerEdge system boards. A Dell TPM is a plug-in module that generates and stores keys, passwords and certificates in hardware, the anchor for BitLocker and pre-boot measurements. Dell states that once installed it is cryptographically bound to that system board and cannot be moved to another server.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eFMYG3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePlug-in TPM module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTPM version\u003c\/th\u003e\n\u003ctd\u003e2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e14th gen 10-pin TPM connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eFMYG3 fits the 14th gen 10-pin TPM connector. The 13th gen modules, 7HGKK and K98XH, and the 15th gen module are different parts and do not interchange. Dell's prerequisites: the OS must support the TPM version installed, the BIOS must be current, and the server must boot in UEFI mode. Dell also offered 14th gen TPM 1.2; this module is 2.0. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-t440-parts\"\u003eDell PowerEdge T440\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose FMYG3 for BitLocker on Windows Server, Secure Boot attestation, and the frameworks that call for TPM 2.0: NIST, CMMC, FedRAMP, HIPAA and PCI DSS. On a T440 or R740 headed for a regulated office, fit it before the OS install. Fair warning: switching an existing install from legacy BIOS to UEFI boot is not a simple toggle, so plan the boot mode first.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eWith the server off, seat the module on the TPM connector. Dell warns it is then cryptographically bound to that system board, and removing it breaks the binding for good. Boot to System Setup, enable TPM Security, and confirm the status reads Enabled, Activated.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951285559495,"sku":"TPM-003","price":55.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-14th-gen-trusted-platform-module-20-tpm-fmyg3-555384.jpg?v=1765539674"},{"product_id":"dell-13th-gen-2-0-tpm-k98xh-m48yr","title":"Dell 13th Gen 2.0 TPM","description":"\u003cp\u003eRefurbished Dell K98XH TPM 2.0 module, the plug-in TPM 2.0 for Dell 13th gen PowerEdge system boards. A Dell TPM is a plug-in module that generates and stores keys, passwords and certificates in hardware, the anchor for BitLocker and pre-boot measurements. Dell states that once installed it is cryptographically bound to that system board and cannot be moved to another server.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eK98XH (equivalent M48YR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePlug-in TPM module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTPM version\u003c\/th\u003e\n\u003ctd\u003e2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e13th gen 8-pin TPM connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eK98XH is Dell's 13th gen TPM 2.0 daughterboard; Dell support maps M48YR to the same card. It plugs into the 13th gen TPM connector; 14th gen boards take FMYG3, and 15th gen boards take a different module. The operating system must support TPM 2.0, and the TPM menu appears in System Setup only once a module is installed. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r630-parts\"\u003eDell PowerEdge R630\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose K98XH for any new 13th gen BitLocker or measured-boot deployment and for audits that ask for TPM 2.0, such as NIST, CMMC, HIPAA and PCI DSS work. Choose 7HGKK, the TPM 1.2 module, only to match servers already provisioned on 1.2. Fair warning: listings sometimes sell 7HGKK as 2.0; check the part number, because the module cannot be moved once bound.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eWith the server off, seat the module on the TPM connector, then enable TPM Security in System Setup, which ships off. Clearing the TPM erases all keys stored in it, so export BitLocker recovery keys before any board or BIOS work.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951285625031,"sku":"TPM-002","price":37.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-14th-gen-trusted-platform-module-20-tpm-fmyg3-355096.jpg?v=1765539674"},{"product_id":"dell-poweredge-emc-r6515-1u-server-front-bezel-faceplate-with-lcd-screen-0521rx-521rx-copy","title":"Dell 14\/15th Gen 1U LCD Bezel","description":"\u003cp\u003eRefurbished Dell 521RX 1U LCD bezel, a locking front bezel with the LCD control panel for 1U Dell 14th and 15th gen PowerEdge servers. A Dell front bezel covers the drive bays and, on locking models, keeps hands off hot-swap drives until someone with the key opens it. Bezels are cut per chassis height and per server generation, so match both before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e521RX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eFront security bezel with LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003eLCD control panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLock\u003c\/th\u003e\n\u003ctd\u003eKeyed lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eOn these 1U chassis Dell puts the LCD control panel in the bezel, so this part is what gives the server a front status display. It fits 1U only; the 2U LCD bezel is 12Y5P. Dell 13th gen 1U bezels are a different design and do not interchange. Resellers also list this bezel as 9NN24 and 7M3F1. Quick Sync 2 on these platforms is a separate wireless module, not a bezel feature. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r640-parts\"\u003eDell PowerEdge R640\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the LCD bezel when people work the rack by eye: the panel shows system ID, status and error messages without a crash cart. Choose the 9MTRW non-LCD bezel when the server is managed only through iDRAC and you just need the drives locked. Fair warning: the key is the weak point; a locked bezel without its key has to be forced off to reach a drive.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951286706375,"sku":"121358-BLD","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-emc-r440-1u-server-front-bezel-faceplate-with-lcd-screen-0521rx-521rx-246624.jpg?v=1765539670"},{"product_id":"dell-poweredge-emc-r6515-1u-non-lcd-security-front-bezel-faceplate-09mtrw-9mtrw-copy","title":"Dell 14\/15th Gen 1U Non-LCD Bezel","description":"\u003cp\u003eRefurbished Dell 9MTRW 1U bezel, a plain locking front bezel without LCD for 1U Dell 14th and 15th gen PowerEdge servers. A Dell front bezel covers the drive bays and, on locking models, keeps hands off hot-swap drives until someone with the key opens it. Bezels are cut per chassis height and per server generation, so match both before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e9MTRW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eStandard front security bezel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLock\u003c\/th\u003e\n\u003ctd\u003eKeyed lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis is the standard 1U bezel: same height and mounting as the 521RX LCD bezel, without the LCD control panel. On these chassis Dell puts the LCD in the bezel, so fitting 9MTRW means no front LCD; iDRAC still reports health. 2U chassis take 8CW5K instead, and Dell 13th gen 1U bezels are a different design. Quick Sync 2 on these platforms is a separate wireless module, not a bezel feature. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r440-parts\"\u003eDell PowerEdge R440\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose 9MTRW when the server is managed through iDRAC or a KVM and the job is keeping drives locked against casual pulls in a shared rack, typical for R440 and R640 nodes in colo. Choose 521RX when techs read status at the rack. Fair warning: a non-LCD bezel cannot gain a display later; the LCD bezel is a separate part.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951286673607,"sku":"LM-GMBV-HUVE","price":10.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-poweredge-emc-r6515-1u-non-lcd-security-front-bezel-faceplate-09mtrw-9mtrw-417723.png?v=1765539714"},{"product_id":"dell-poweredge-emc-14th-15th-gen-lcd-security-front-bezel-faceplate-012y5p-12y5p-copy","title":"Dell 14\/15th Gen 2U LCD Bezel","description":"\u003cp\u003eRefurbished Dell 12Y5P 2U LCD bezel, a locking front bezel with the LCD control panel for 2U Dell 14th and 15th gen PowerEdge servers. A Dell front bezel covers the drive bays and, on locking models, keeps hands off hot-swap drives until someone with the key opens it. Bezels are cut per chassis height and per server generation, so match both before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e12Y5P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eFront security bezel with LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003eLCD control panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLock\u003c\/th\u003e\n\u003ctd\u003eKeyed lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eSized for 2U chassis; the 1U LCD bezel is 521RX and the 2U non-LCD bezel is 8CW5K. Dell puts the LCD control panel in the bezel on these platforms, so this part is the front status display. Dell 13th gen 2U bezels are a different design and do not interchange. Quick Sync 2 on these platforms is a separate wireless module, not a bezel feature. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r740xd-parts\"\u003eDell PowerEdge R740xd\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose 12Y5P when techs need system ID, status and error messages at the rack without a crash cart, common on R740xd storage nodes in a shared colo. Choose 8CW5K when the server is managed only through iDRAC and the bezel is there to lock drives. Fair warning: an LCD bezel without its key locks you out of every drive bay, so keep the key with the rack.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951287066823,"sku":"144308-BLD","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-poweredge-emc-r750-lcd-security-front-bezel-faceplate-012y5p-12y5p-473151.png?v=1765539715"},{"product_id":"dell-poweredge-emc-14th-gen-2u-server-front-bezel-faceplate-0gn9gf-gn9gf-copy","title":"Dell 14\/15th Gen 2U Non-LCD Bezel","description":"\u003cp\u003eRefurbished Dell 8CW5K 2U front bezel, the standard locking bezel without a display for Dell 14th gen and 15th gen PowerEdge 2U rack servers. A Dell front bezel covers the drive bays and, on locking models, keeps hands off hot-swap drives until someone with the key opens it. Bezels are cut per chassis height and per server generation, so match both before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e8CW5K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eFront bezel, 2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLock\u003c\/th\u003e\n\u003ctd\u003eKeyed lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis bezel is cut for the 14th gen and 15th gen 2U chassis front; it does not fit the 13th gen 2U servers, which take 8RFGM, and it does not fit 1U chassis. It is the non-LCD version: the matching LCD bezel for the same chassis is 12Y5P. The lock engages a latch on the chassis ear, so a chassis with a damaged ear will not retain it. Nothing on the bezel is powered, so there is no connector to line up. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r740-parts\"\u003eDell PowerEdge R740\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the plain bezel when you want the drives covered and locked without paying for the LCD panel, which on a server you manage through the remote controller rarely gets looked at. If your team reads status at the rack door, the LCD version 12Y5P on the same chassis is the better buy. Fair warning: the lock keeps casual hands off the drives, not a determined one; it is a tamper deterrent, not a security control.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951287132359,"sku":"LM-TNEL-CSGU","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-poweredge-emc-14th-gen-2u-server-front-bezel-faceplate-0gn9gf-gn9gf-251270.jpg?v=1765539687"},{"product_id":"dell-poweredge-12th-13th-gen-1u-front-bezel-faceplate","title":"Dell PowerEdge 12th 13th Gen 1U Front Bezel Faceplate","description":"\u003cp\u003eRefurbished Dell FTMDX 1U front bezel, the faceplate for Dell 13th gen PowerEdge 1U rack servers and their 12th gen predecessors. A Dell front bezel covers the drive bays and, on locking models, keeps hands off hot-swap drives until someone with the key opens it. Bezels are cut per chassis height and per server generation, so match both before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eFTMDX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eFront bezel, 1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis bezel fits the 1U chassis front of the 13th gen rack servers and the 12th gen chassis they inherited; it does not fit the newer 1U servers, which changed the ear and latch design and take 9MTRW or the LCD 521RX. It is a 1U part and will not span a 2U face. It has no display and no connector, so it clips on with no cabling. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r630-parts\"\u003eDell PowerEdge R630\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose this bezel to put a clean face back on a 13th gen 1U server that lost its original, or to cover drive bays in a shared rack. If you need the drives locked, confirm the lock and key are present on the unit you receive, since this generation shipped both ways. Fair warning: the newer 1U bezels look similar at a glance and do not fit; match the generation, not the rack height.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951287787719,"sku":"101049-BLD","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-poweredge-12th-13th-gen-1u-front-bezel-faceplate-675858.jpg?v=1765539727"},{"product_id":"dell-poweredge-r550-r750xs-r760-b21-2u-sliding-rails","title":"Dell PowerEdge 2U B21 Sliding Rail Kit","description":"\u003cp\u003eRefurbished Dell B21 ReadyRails II sliding rail kit, the 2U tool-less rail for Dell 15th gen and 16th gen PowerEdge servers that carry rail identifier B21. Dell matches rails to servers by rail identifier, so the A or B code is what has to fit your chassis, not the server name. Sliding rails pull the server out of the rack for service, while static rails fit more rack types but hold the chassis in place.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eKN2D5 (also K87YW)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSliding, ReadyRails II, rail identifier B21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTool-less in square and unthreaded round holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack compatibility\u003c\/th\u003e\n\u003ctd\u003e4-post square, unthreaded round, threaded round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable management arm\u003c\/th\u003e\n\u003ctd\u003eSupported, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe B21 is the ReadyRails II sliding kit for Dell's current 2U chassis. It mounts tool-less in square-hole and unthreaded round-hole 4-post racks; threaded round-hole racks need a minor conversion, screws that are not in the kit, and a screw head no wider than 10 mm. It has no 2-post mount. The CMA attaches at the rear. The B21 does not fit the earlier 2U chassis that take the B6, even though both are 2U two-socket servers. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r750xs-parts\"\u003eDell PowerEdge R750xs\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the B21 when a tagged 15th gen or 16th gen 2U server will be serviced in the rack. If the server is going into a threaded or 2-post rack, Dell's combo and static kits for the same chassis are the alternatives, at the cost of the service slide in threaded racks. Fair warning: a B6 rail from a retired server will not carry this chassis; the mounting points moved with the generation.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951290179783,"sku":"3478-BLD","price":50.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-poweredge-r550r750xsr760-sff-b21-2u-sliding-rails-985931.png?v=1765539720"},{"product_id":"dell-poweredge-r530-r540-r730-r730xd-r740-2u-b6-ready-rails-ii-sliding-rail-kit","title":"Dell PowerEdge 2U B6 ReadyRails II Sliding Rail Kit","description":"\u003cp\u003eRefurbished Dell B6 ReadyRails II sliding rail kit, the 2U tool-less rail that Dell carried across its 13th gen, 14th gen and 15th gen two-socket rack servers under rail identifier B6. Dell matches rails to servers by rail identifier, so the A or B code is what has to fit your chassis, not the server name. Sliding rails pull the server out of the rack for service, while static rails fit more rack types but hold the chassis in place.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eH4X6X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSliding, ReadyRails II, rail identifier B6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTool-less in square and unthreaded round holes; tooled with adapter in threaded holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack compatibility\u003c\/th\u003e\n\u003ctd\u003e4-post square, unthreaded round, threaded round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable management arm\u003c\/th\u003e\n\u003ctd\u003eSupported, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe B6 is the long-running 2U ReadyRails II sliding kit. It installs tool-less in square-hole and unthreaded round-hole 4-post racks and with the optional threaded-hole adapter in tapped racks. It has no 2-post mount. A Dell CMA attaches to the rear of the outer members. Because Dell kept the B6 identifier across three generations, a B6 kit from an older 2U server fits the newer one; the deep storage chassis and the four-socket servers carry their own identifiers. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r740-parts\"\u003eDell PowerEdge R740\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the B6 for any tagged 2U server that will be serviced in the rack; it is the most common Dell 2U rail and the easiest to source. If the server sits in a 2-post rack or will never be opened in place, Dell's stab-in static 2U kit is cheaper and fits more rack types. Fair warning: confirm the identifier on your rail before ordering a second set.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951290409159,"sku":"94547-BLD","price":92.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-poweredge-r730-r730xd-r740-r740xd-2u-b6-ready-rails-kit-424131.png?v=1765539719"},{"product_id":"dell-r450-r650xs-boss-card-with-2x-240gb-m-2","title":"Dell BOSS-S1 Card Kit with 2x 240GB M.2 SSD","description":"\u003cp\u003eRefurbished Dell BOSS-S1 2x 240GB kit, a compact hypervisor boot mirror for a PCIe slot in Dell 14th and 15th gen PowerEdge servers. Dell BOSS mirrors two M.2 SATA SSDs in hardware RAID 1 on a dedicated controller, so the operating system boots off the front bays and does not use a PERC channel. Dell supports one virtual disk per card, so the pair is the boot volume and nothing else.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e51CN2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBOSS-S1 boot controller kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrives\u003c\/th\u003e\n\u003ctd\u003e2x 240GB M.2 SATA SSD, 80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRAID\u003c\/th\u003e\n\u003ctd\u003eHardware RAID 1 or non-RAID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003ePCIe x8 connector, Gen 2 x2 lanes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003ePCIe adapter card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eBOSS-S1 is a PCIe adapter holding two 80mm M.2 SATA SSDs; it does not run NVMe M.2. Dell supports RAID 1 or non-RAID, no RAID 0, one virtual disk. There are no drive LEDs and no hot-plug; a drive swap means powering down. Some 15th gen chassis take the S1 as an integrated-slot module, so confirm yours takes the adapter form. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r440-parts\"\u003eDell PowerEdge R440\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003ePick the 240GB pair for a hypervisor boot mirror: ESXi or a Hyper-V host keeps its virtual machines on the data array, so the boot volume never needs more. Step up to the 480GB kit when Windows Server runs on bare metal. Against two front-bay SSDs, BOSS gives back both bays and the PERC channel. On 15th gen chassis with a rear BOSS bay, BOSS-S2 adds drive hot-plug.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eCreate the RAID 1 virtual disk in the BOSS-S1 configuration utility before the OS install and set it first in UEFI boot order. It always spans the full mirror; Dell does not support a smaller size.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951333892295,"sku":"BOSS-000010","price":209.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/s-l1600_e69cbd89-b1ad-4708-9528-91eb198ba6ef.webp?v=1781697383"},{"product_id":"dell-r450-r650xs-boss-card-with-2x-480gb-m-2","title":"Dell BOSS-S1 Card Kit with 2x 480GB M.2 SSD","description":"\u003cp\u003eRefurbished Dell BOSS-S1 2x 480GB kit, a mid-size operating system mirror for a PCIe slot in Dell 14th and 15th gen PowerEdge servers. Dell BOSS mirrors two M.2 SATA SSDs in hardware RAID 1 on a dedicated controller, so the operating system boots off the front bays and does not use a PERC channel. Dell supports one virtual disk per card, so the pair is the boot volume and nothing else.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e51CN2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBOSS-S1 boot controller kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrives\u003c\/th\u003e\n\u003ctd\u003e2x 480GB M.2 SATA SSD, 80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRAID\u003c\/th\u003e\n\u003ctd\u003eHardware RAID 1 or non-RAID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003ePCIe x8 connector, Gen 2 x2 lanes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003ePCIe adapter card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eBOSS-S1 is a PCIe adapter holding two 80mm M.2 SATA SSDs; it does not run NVMe M.2. Dell supports RAID 1 or non-RAID, no RAID 0, one virtual disk. There are no drive LEDs and no hot-plug; a drive swap means powering down. Some 15th gen chassis take the S1 as an integrated-slot module, so confirm yours takes the adapter form. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r640-parts\"\u003eDell PowerEdge R640\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 480GB pair is for Windows Server on bare metal with local logs, page file and update cache on the boot volume, or a Linux root with room under \/var and \/opt. If the box only boots ESXi or Hyper-V, the 240GB kit does the same job. If the root also carries container images or long log retention, take the 1TB kit. Either way the front bays stay free for data.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eBuild the mirror in the BOSS-S1 configuration utility, install the OS to that one virtual disk, and set it first in UEFI boot order. It always spans the full 480GB mirror.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951339462855,"sku":"BOSS-000011","price":1029.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/s-l1600_e69cbd89-b1ad-4708-9528-91eb198ba6ef.webp?v=1781697383"},{"product_id":"hp-1u-lff-sliding-rail-kit","title":"HPE 1U Sliding Rail Kit 789388-B21","description":"\u003cp\u003eRefurbished HPE 789388-B21 1U LFF Easy Install rail kit, the tool-less sliding rail for large form factor 1U chassis in HPE ProLiant Gen9 and Gen10 servers. HPE matches rail kits to chassis height and depth, so 1U, 2U and 4U kits, and the SFF and LFF versions of one height, are separate parts. Sliding rails let the server pull forward for service, and the cable management arm is usually a separate option.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e789388-B21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSliding, Easy Install, 1U LFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTool-less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack compatibility\u003c\/th\u003e\n\u003ctd\u003e19-inch 4-post racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable management arm\u003c\/th\u003e\n\u003ctd\u003eOptional, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003eLFF (3.5-inch) chassis only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eHPE names this kit the 1U LFF Gen9 Easy Install Rail Kit. It fits 1U ProLiant chassis with 3.5-inch drive bays, which are deeper than the SFF version of the same server; the SFF chassis takes 734807-B21 instead. It mounts in 19-inch 4-post racks and takes the optional 1U cable management arm. Confirm the chassis form factor before ordering, because the two kits are not interchangeable even on the same model name. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl360-gen9-parts\"\u003eHPE ProLiant DL360 Gen9\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose this kit for a 1U LFF server you want to slide forward for drive cage or lid work without unracking it. If the server has 2.5-inch bays, buy the SFF kit. Fair warning: HPE lists this kit against the Gen9 1U LFF chassis; on a Gen10 1U server check the chassis depth against the kit before you commit a rack position, and order the CMA at the same time if the rear cabling is dense.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":45951350472903,"sku":"R-000008","price":74.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/hp-1u-lff-sliding-rail-kit-728233.jpg?v=1765539795"},{"product_id":"hp-dl580-g9-sliding-rail-kit","title":"HPE DL580 Gen9 4U Sliding Rail Kit 734540-001","description":"\u003cp\u003eRefurbished HPE 734540-001 4U rail kit, the sliding rail spare for the HPE ProLiant DL580 Gen9 four-socket server. HPE matches rail kits to chassis height and depth, so 1U, 2U and 4U kits, and the SFF and LFF versions of one height, are separate parts. Sliding rails let the server pull forward for service, and the cable management arm is usually a separate option.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e734540-001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSliding rail kit, 4U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e4U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack compatibility\u003c\/th\u003e\n\u003ctd\u003e19-inch 4-post racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable management arm\u003c\/th\u003e\n\u003ctd\u003eSupported; HPE ships rails with CMA on configured models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe DL580 Gen9 is a 4U chassis and takes its own rail; the 1U and 2U Easy Install kits do not reach it. This spare is the rail set HPE fits at the factory, and the Gen9 QuickSpecs state that rails and a cable management arm ship with the pre-configured models. It mounts in 19-inch 4-post racks. Confirm whether your kit includes the arm, because the spare number covers the rails and resellers differ on what is in the box. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl580-gen9-parts\"\u003eHPE ProLiant DL580 Gen9\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose this kit for a DL580 Gen9 that arrived without rails or whose rails were damaged in a move; it is the factory part and the only HPE option for the chassis. A 4U four-socket server is heavy enough that a service slide is not a luxury, so do not substitute a fixed shelf if the server will be opened in place. Fair warning: plan a two-person install and seat both rails fully before the chassis goes on.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":45951352012999,"sku":"101067-BLD","price":50.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/hp-dl580-g9-sliding-rail-kit-999400.jpg?v=1765539794"},{"product_id":"dell-r740xd2-static-rail-kit","title":"Dell PowerEdge 2U B4 ReadyRails Static Rail Kit","description":"\u003cp\u003eRefurbished Dell 2U static rail kit for the Dell 14th gen PowerEdge R740xd2 storage server, an L-bracket kit that holds the deep 26-bay chassis without a service slide. Dell matches rails to servers by rail identifier, so the A or B code is what has to fit your chassis, not the server name. Sliding rails pull the server out of the rack for service, while static rails fit more rack types but hold the chassis in place.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eVPWTX (also 23FHK, 2CKCH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eL-bracket static, generic tool-less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTool-less in square and unthreaded round holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack compatibility\u003c\/th\u003e\n\u003ctd\u003e4-post square and unthreaded round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable management arm\u003c\/th\u003e\n\u003ctd\u003eNot supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis is the only rail Dell lists for the R740xd2: an L-bracket static kit, generic tool-less, for 4-post square-hole and unthreaded round-hole racks. It has no threaded-hole option, no 2-post mount and no CMA attachment, and it does not extend the server for service. The R740xd2 is longer than the standard 2U chassis, so the rails Dell sells for the other 2U servers of the same generation do not fit it. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r740xd2-parts\"\u003eDell PowerEdge R740xd2\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose this kit because it is the one that fits: the R740xd2 ships on L-bracket static rails and there is no sliding alternative from Dell. Plan rack depth with the chassis length in mind and leave rear clearance for the cables, since there is no arm to manage them. Fair warning: resellers label this kit several ways; match the part number to your rail, not the label on the box.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951356272839,"sku":"150147-BLD","price":44.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-r740xd2-static-rail-kit-606852.png?v=1765539803"},{"product_id":"hpe-g10-2u-security-bezel","title":"HPE G10 2U Security Bezel","description":"\u003cp\u003eRefurbished HPE 867809-B21 Gen10 2U bezel kit, the locking security bezel for HPE ProLiant Gen10 2U rack servers. An HPE security bezel covers the front drive cage and locks so hot-plug drives cannot be pulled while it is closed. It is cut to the chassis height and generation, so match both before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e867809-B21 (spare 875065-001)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSecurity bezel kit, 2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLock\u003c\/th\u003e\n\u003ctd\u003eKeyed lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eHPE sells this kit for its Gen10 2U chassis, and the DL560 Gen10 QuickSpecs list a bezel locking kit as its option. It does not fit the Gen9 2U chassis, whose bezel is a separate part, and it does not fit 1U servers. The bezel latches onto the chassis ears and locks with the supplied key; nothing is powered. Front-panel status LEDs stay visible through the bezel. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl380-gen10-parts\"\u003eHPE ProLiant DL380 Gen10\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose this kit to lock the drive cage on a Gen10 2U server in a shared rack or a colocation cage, where the risk is a hand on the wrong drive. If the server sits in a locked cabinet and you only want the front covered, the bezel still fits but you are paying for a lock you will not use. Fair warning: HPE bezels are generation specific; the previous generation's bezel will not latch on this chassis.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":45951357944007,"sku":"BZL-000008","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/hpe-proliant-dl380-gen10-plus-2u-front-bezel-faceplate-867809-b21-757164.png?v=1765539660"},{"product_id":"hpe-proliant-dl360-g10-sff-rails","title":"HPE DL360 Gen10 Plus 1U Sliding Rail Kit P26485-B21","description":"\u003cp\u003eRefurbished HPE P26485-B21 1U rail kit, the tool-less sliding rail HPE specifies for the ProLiant DL360 Gen10 Plus small form factor chassis. HPE matches rail kits to chassis height and depth, so 1U, 2U and 4U kits, and the SFF and LFF versions of one height, are separate parts. Sliding rails let the server pull forward for service, and the cable management arm is usually a separate option.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eP26485-B21 (spare P38898-001)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSliding, Easy Install, 1U SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTool-less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack compatibility\u003c\/th\u003e\n\u003ctd\u003e19-inch 4-post racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable management arm\u003c\/th\u003e\n\u003ctd\u003eOptional, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis is the Gen10 Plus 1U kit, not the earlier Gen9 and Gen10 1U rails: HPE moved the mounting points with the new chassis, so the older Easy Install kits do not latch on this server. It fits the SFF 1U chassis in 19-inch 4-post racks and accepts the matching 1U cable management arm. HPE spares the rail set as P38898-001 in the DL360 Gen10 Plus maintenance guide. Browse matching parts for the \u003ca href=\"\/collections\/hpe-proliant-dl360-gen10-plus-parts\"\u003eHPE ProLiant DL360 Gen10 Plus\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose this kit for any DL360 Gen10 Plus going into a standard 4-post cabinet; it is the rail HPE ships with the server and the only one that fits. If you are moving a Gen10 Plus into a rack position vacated by an older 1U ProLiant, do not reuse the old rails. Fair warning: the Gen10 Plus chassis is deeper than its predecessor, so check rear clearance for the CMA in a 1000 mm cabinet.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":45951420629191,"sku":"R-000021","price":227.6,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-boss-card-2x-1tb-m-2-ssd","title":"Dell BOSS-S1 Card Kit with 2x 1TB M.2 SSD","description":"\u003cp\u003eRefurbished Dell BOSS-S1 2x 1TB kit, the high-capacity boot mirror for a PCIe slot in Dell 14th and 15th gen PowerEdge servers. Dell BOSS mirrors two M.2 SATA SSDs in hardware RAID 1 on a dedicated controller, so the operating system boots off the front bays and does not use a PERC channel. Dell supports one virtual disk per card, so the pair is the boot volume and nothing else.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e51CN2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBOSS-S1 boot controller kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrives\u003c\/th\u003e\n\u003ctd\u003e2x 1TB M.2 SATA SSD, 80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRAID\u003c\/th\u003e\n\u003ctd\u003eHardware RAID 1 or non-RAID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003ePCIe x8 connector, Gen 2 x2 lanes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003ePCIe adapter card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eBOSS-S1 is a PCIe adapter holding two 80mm M.2 SATA SSDs; it does not run NVMe M.2. Dell supports RAID 1 or non-RAID, no RAID 0, one virtual disk. There are no drive LEDs and no hot-plug; a drive swap means powering down. Some 15th gen chassis take the S1 as an integrated-slot module, so confirm yours takes the adapter form. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r740-parts\"\u003eDell PowerEdge R740\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 1TB pair suits a Linux root that also holds container images, a local package mirror or long log retention, or Windows Server with large crash dumps and application data on the boot volume. For hypervisor boot alone, the 240GB kit does the same job. Fair warning: Dell's BOSS-S1 drive list names 240GB and 480GB SSDs, so if a support contract requires Dell-listed drives, take the 480GB kit.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951569526983,"sku":"BOSS-000012","price":1351.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-boss-card-with-2x-1tb-m2-ssds-high-capacity-boot-optimization-for-14th-gen-poweredge-servers-449248.png?v=1781697553"},{"product_id":"dell-15g-tpm-2-0-v3","title":"Dell 15G TPM 2.0 V3","description":"\u003cp\u003eRefurbished Dell 151Y6 TPM 2.0 V3 module, the plug-in TPM for Dell 15th gen PowerEdge system boards. A Dell TPM is a plug-in module that generates and stores keys, passwords and certificates in hardware, the anchor for BitLocker and pre-boot measurements. Dell states that once installed it is cryptographically bound to that system board and cannot be moved to another server.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e151Y6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTPM 2.0 V3 plug-in module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTPM version\u003c\/th\u003e\n\u003ctd\u003e2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003e15th gen TPM connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003e151Y6 is listed for the 15th gen TPM connector; resellers also list it for 16th gen boards. It does not fit 13th or 14th gen boards, which take K98XH or FMYG3. Dell's install prerequisites apply: current BIOS, UEFI boot mode, and an OS that supports TPM 2.0. Listings carry it under the TPM 2.0 V3 name. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r550-parts\"\u003eDell PowerEdge R550\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose 151Y6 when a 15th gen server arrived without a TPM and now needs BitLocker, Secure Boot attestation or a compliance audit under NIST, CMMC, HIPAA or PCI DSS. On an R650 or R750 joining a managed fleet, fit it before imaging. Fair warning: a module bound to a board that is later replaced under service does not move to the new board; plan for a second TPM.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eSeat the module with the server off, then enable TPM Security in System Setup. Dell states the module is cryptographically bound to that board once installed, and a removed TPM cannot be reinstalled on any board. Move BitLocker recovery keys off the server before any board swap.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":46672458121415,"sku":"TPM-001","price":78.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-14th-gen-tpm-384700_28b5334e-2574-4a44-868d-ae5f9a2555d4.jpg?v=1765837244"},{"product_id":"dell-poweredge-r730xd-2u-front-bezel-0dd0w1","title":"Dell PowerEdge R730xd 2U Front Bezel 0DD0W1","description":"\u003cp\u003eRefurbished Dell 0DD0W1 2U front bezel for the Dell 13th gen PowerEdge R730xd storage server, a locking bezel that covers the 24-bay front without a display. A Dell front bezel covers the drive bays and, on locking models, keeps hands off hot-swap drives until someone with the key opens it. Bezels are cut per chassis height and per server generation, so match both before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e0DD0W1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eFront bezel, 2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLock\u003c\/th\u003e\n\u003ctd\u003eKeyed lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis bezel fits the 13th gen 2U chassis front and is the part Dell shipped on the R730xd; resellers cross it to 8RFGM, the security bezel for the same chassis. It does not fit the 14th gen 2U servers or any 1U chassis. The lock engages the chassis ear latch. There is no display and no connector, so nothing lines up but the latches. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r730xd-parts\"\u003eDell PowerEdge R730xd\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose this bezel for an R730xd whose front is bare: with 24 hot-swap bays facing the aisle, a locked bezel is the cheapest insurance against a drive pulled by mistake. If you also run the 2U compute servers of the same generation, 8RFGM covers them with the same fit. Fair warning: the bezel does not change airflow, so a server that ran warm without one will run the same with it.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":68009122136263,"sku":"B-0000013","price":48.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-poweredge-r840-2u-b15-sliding-rail-kit","title":"Dell PowerEdge R840 2U B15 Sliding Rail Kit","description":"\u003cp\u003eRefurbished Dell B15 rail kit, the 2U drop-in and stab-in rail for the Dell 14th gen PowerEdge R840 four-socket server, rail identifier B15. Dell matches rails to servers by rail identifier, so the A or B code is what has to fit your chassis, not the server name. Sliding rails pull the server out of the rack for service, while static rails fit more rack types but hold the chassis in place.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eN1D5C (also CYKC1, F2KJF, N4M5, 4V2GY, VC9DC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eDrop-in and stab-in rail kit, rail identifier B15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTool-less in square and unthreaded round holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack compatibility\u003c\/th\u003e\n\u003ctd\u003e4-post racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe R840 packs four sockets into 2U and carries its own rail identifier; the B6 kit from the two-socket 2U servers does not fit it. The B15 is a combo kit: drop-in in square-hole and unthreaded round-hole 4-post racks, where it slides for service, and stab-in where the rack is threaded. Dell sold the same kit under several part numbers, all interchangeable. Check cabinet depth: the R840 is a deep chassis and the rear cabling needs clearance behind the rail ends. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r840-parts\"\u003eDell PowerEdge R840\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose this kit for any R840 going into a standard 4-post cabinet; it is the Dell rail for the chassis and the only one that gives the service slide. If the server is going into a threaded rack, the same kit installs as a static rail, so plan to unrack for lid-off work there. Fair warning: order by the B15 identifier, not by the 2U label, or you will receive a two-socket rail that does not reach the R840 mounting points.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":68010823221447,"sku":"K-0000026","price":182.5,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-poweredge-4u-b8-readyrails-ii-sliding-rail-kit","title":"Dell PowerEdge 4U B8 ReadyRails II Sliding Rail Kit","description":"\u003cp\u003eRefurbished Dell B8 ReadyRails II sliding rail kit, the heavy 4U rail for the Dell 13th gen PowerEdge R930 four-socket server, rail identifier B8. Dell matches rails to servers by rail identifier, so the A or B code is what has to fit your chassis, not the server name. Sliding rails pull the server out of the rack for service, while static rails fit more rack types but hold the chassis in place.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eGWJY0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSliding, ReadyRails II, rail identifier B8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e4U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTool-less in square and unthreaded round holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack compatibility\u003c\/th\u003e\n\u003ctd\u003e4-post square, unthreaded round, threaded round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable management arm\u003c\/th\u003e\n\u003ctd\u003eSupported, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe B8 is sized for the 4U four-socket chassis and its weight; it is not interchangeable with the 1U and 2U ReadyRails II kits. It mounts tool-less in square-hole and unthreaded round-hole 4-post racks; threaded round-hole racks need a minor conversion, mounting screws that are not in the kit, and a screw head no wider than 10 mm. There is no 2-post mount. The CMA attaches at the rear and shortens the usable depth range when fitted, so check cabinet depth on a fully loaded chassis. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r930-parts\"\u003eDell PowerEdge R930\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the B8 when the R930 will be serviced in the rack: with four sockets and 96 DIMM slots, sliding it forward for a memory swap is worth more than on a 1U box. There is no Dell static alternative for this chassis, so the choice is this kit or shelf rails from a rack vendor. Fair warning: the chassis is heavy; seat both rails fully before the server goes on them.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":68010825973959,"sku":"K-0000027","price":38.5,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-poweredge-r940-3u-b12-readyrails-ii-sliding-rail-kit","title":"Dell PowerEdge R940 3U B12 ReadyRails II Sliding Rail Kit","description":"\u003cp\u003eRefurbished Dell 3U sliding rail kit for the Dell 14th gen PowerEdge R940 four-socket server, the ReadyRails sliding kit sold under rail identifier B12. Dell matches rails to servers by rail identifier, so the A or B code is what has to fit your chassis, not the server name. Sliding rails pull the server out of the rack for service, while static rails fit more rack types but hold the chassis in place.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eH9VKR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSliding ReadyRails, sold as rail identifier B12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e3U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTool-less ReadyRails in square and unthreaded round holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack compatibility\u003c\/th\u003e\n\u003ctd\u003e4-post racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable management arm\u003c\/th\u003e\n\u003ctd\u003eSold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe R940 is a 3U chassis and takes its own rail; the 2U and 4U ReadyRails II kits do not fit it. This kit is the sliding version, which installs tool-less in square-hole and unthreaded round-hole 4-post racks and extends the server forward for service. Rack depth matters on a 3U four-socket chassis with a CMA fitted, so measure from the front mounting flange to the rear door before ordering the arm. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r940-parts\"\u003eDell PowerEdge R940\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose this kit when the R940 will be opened in place: four sockets, 48 DIMM slots and the riser cage all want a service slide. Dell does not sell a static alternative for this chassis, so the only other route is a third-party shelf. Fair warning: resellers attach the B12 identifier to several Dell part numbers; match the identifier stamped on your existing rail, and if the rack is threaded, confirm the adapter requirement before the install day.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":68010827317447,"sku":"K-0000012","price":38.5,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-boss-s2-card-kit-with-2x-240gb-m-2-ssd","title":"Dell BOSS-S2 Card Kit with 2x 240GB M.2 SSD","description":"\u003cp\u003eRefurbished Dell BOSS-S2 2x 240GB kit, a rear hot-plug hypervisor boot mirror for the BOSS slot in Dell 15th gen PowerEdge servers. Dell BOSS mirrors two M.2 SATA SSDs in hardware RAID 1 on a dedicated controller, so the operating system boots off the front bays and does not use a PERC channel. Dell supports one virtual disk per card, so the pair is the boot volume and nothing else.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eFRY80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBOSS-S2 rear boot module kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrives\u003c\/th\u003e\n\u003ctd\u003e2x 240GB M.2 SATA SSD, 80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRAID\u003c\/th\u003e\n\u003ctd\u003eHardware RAID 1 or non-RAID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003ePCIe Gen 2 x4 host, 6 Gb\/s SATA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003eRear hot-plug M.2 module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eBOSS-S2 mounts in the integrated BOSS slot at the rear, cabled to the system board with BOSS power and signal cables; it does not go in a riser slot. It runs two 80mm M.2 SATA SSDs in RAID 1 or non-RAID, no RAID 0, one virtual disk. It is not NVMe; Dell moved to the NVMe BOSS-N1 on 16th gen. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r650-parts\"\u003eDell PowerEdge R650\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the 240GB S2 pair for an ESXi or Hyper-V boot mirror where the virtual machines live on the data array; a hypervisor never fills it. The reason to pick S2 over a BOSS-S1 adapter on these chassis is service: a failed M.2 comes out the rear with the server running, and the card rebuilds the mirror. Step up to 480GB when Windows Server runs on bare metal.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eCreate the RAID 1 virtual disk in the BOSS-S2 configuration utility and set it first in UEFI boot order. A failed M.2, marked by its LED, comes out the rear with the server running.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":68011592908999,"sku":"BC-0000005","price":610.7,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-boss-s2-card-kit-with-2x-480gb-m-2-ssd","title":"Dell BOSS-S2 Card Kit with 2x 480GB M.2 SSD","description":"\u003cp\u003eRefurbished Dell BOSS-S2 2x 480GB kit, a rear-access operating system mirror for the BOSS slot in Dell 15th gen PowerEdge servers. Dell BOSS mirrors two M.2 SATA SSDs in hardware RAID 1 on a dedicated controller, so the operating system boots off the front bays and does not use a PERC channel. Dell supports one virtual disk per card, so the pair is the boot volume and nothing else.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eFRY80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBOSS-S2 rear boot module kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrives\u003c\/th\u003e\n\u003ctd\u003e2x 480GB M.2 SATA SSD, 80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRAID\u003c\/th\u003e\n\u003ctd\u003eHardware RAID 1 or non-RAID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003ePCIe Gen 2 x4 host, 6 Gb\/s SATA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003eRear hot-plug M.2 module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eBOSS-S2 mounts in the integrated BOSS slot at the rear, cabled to the system board with BOSS power and signal cables; it does not go in a riser slot. It runs two 80mm M.2 SATA SSDs in RAID 1 or non-RAID, no RAID 0, one virtual disk. It is not NVMe; Dell moved to the NVMe BOSS-N1 on 16th gen. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r750-parts\"\u003eDell PowerEdge R750\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eThe 480GB S2 pair fits Windows Server on bare metal with local logs, page file and updates, or a Linux root with space under \/var. For hypervisor-only boot the 240GB kit does the same job; for container images or long log retention on the root, take 1TB. Against a BOSS-S1 adapter, S2 keeps the PCIe slots free and lets you swap a drive without downtime.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eSet up the RAID 1 virtual disk in the BOSS-S2 configuration utility before the OS install. Each M.2 has its own rear LED, so a degraded drive is hot-swapped without opening the chassis.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":68011594088647,"sku":"BC-0000006","price":1147.3,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-boss-s2-card-kit-with-2x-1tb-m-2-ssd","title":"Dell BOSS-S2 Card Kit with 2x 1TB M.2 SSD","description":"\u003cp\u003eRefurbished Dell BOSS-S2 2x 1TB kit, the largest rear hot-plug boot mirror for the BOSS slot in Dell 15th gen PowerEdge servers. Dell BOSS mirrors two M.2 SATA SSDs in hardware RAID 1 on a dedicated controller, so the operating system boots off the front bays and does not use a PERC channel. Dell supports one virtual disk per card, so the pair is the boot volume and nothing else.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eFRY80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBOSS-S2 rear boot module kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrives\u003c\/th\u003e\n\u003ctd\u003e2x 1TB M.2 SATA SSD, 80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRAID\u003c\/th\u003e\n\u003ctd\u003eHardware RAID 1 or non-RAID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003ePCIe Gen 2 x4 host, 6 Gb\/s SATA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003eRear hot-plug M.2 module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eBOSS-S2 mounts in the integrated BOSS slot at the rear, cabled to the system board with BOSS power and signal cables; it does not go in a riser slot. It runs two 80mm M.2 SATA SSDs in RAID 1 or non-RAID, no RAID 0, one virtual disk. It is not NVMe; Dell moved to the NVMe BOSS-N1 on 16th gen. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r750xs-parts\"\u003eDell PowerEdge R750xs\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eTake the 1TB S2 pair for a Linux root carrying container images, local repositories or long log retention, or Windows Server with large dumps and application data on the boot volume. For a hypervisor, 240GB is enough. Fair warning: Dell's BOSS-S2 guide lists 240GB and 480GB drives and supports the card with the drives it shipped with, so a build under Dell support should use the 480GB kit.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":68011595038919,"sku":"BC-0000007","price":1454.2,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-poweredge-1u-a8-readyrails-static-rail-kit","title":"Dell PowerEdge 1U A8 ReadyRails Static Rail Kit","description":"\u003cp\u003eRefurbished Dell A8 ReadyRails static rail kit, the 1U stab-in rail for Dell 14th gen PowerEdge servers that carry rail identifier A8. Dell matches rails to servers by rail identifier, so the A or B code is what has to fit your chassis, not the server name. Sliding rails pull the server out of the rack for service, while static rails fit more rack types but hold the chassis in place.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e53D7M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eStab-in static, ReadyRails, rail identifier A8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTool-less in square and unthreaded round holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack compatibility\u003c\/th\u003e\n\u003ctd\u003e4-post square, unthreaded round, threaded round; 2-post flush and center\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable management arm\u003c\/th\u003e\n\u003ctd\u003eNot supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe A8 is a stab-in static kit: the inner members bolt to the chassis and stab into the outer members already in the rack. It fits 4-post square-hole and unthreaded round-hole racks tool-less, threaded round-hole racks with a minor conversion and your own screws, and 2-post racks in flush or center mount, which the sliding rails cannot do. There is no service slide and no CMA attachment. Browse matching parts for the \u003ca href=\"\/collections\/dell-poweredge-r440-parts\"\u003eDell PowerEdge R440\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose the A8 for a 2-post telco rack, a shallow cabinet, or a server that will not be opened in place. If you expect to service the machine in the rack, the sliding A11 for the same chassis is the better buy. Fair warning: static rails cost you an unrack every time the lid comes off, so pick by how often you expect to be inside the server.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":68012906447047,"sku":"K-0000017","price":32.4,"currency_code":"USD","in_stock":true}]},{"product_id":"hpe-2u-sff-easy-install-sliding-rail-kit-733660-b21","title":"HPE 2U SFF Easy Install Sliding Rail Kit 733660-B21","description":"\u003cp\u003eRefurbished HPE 733660-B21 2U SFF Easy Install rail kit, a tool-less sliding rail set for small form factor 2U chassis in HPE ProLiant servers. HPE matches rail kits to chassis height and depth, so 1U, 2U and 4U kits, and the SFF and LFF versions of one height, are separate parts. Sliding rails let the server pull forward for service, and the cable management arm is usually a separate option.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e733660-B21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSliding, Easy Install, 2U SFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack units\u003c\/th\u003e\n\u003ctd\u003e2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTool-less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRack compatibility\u003c\/th\u003e\n\u003ctd\u003e19-inch 4-post racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable management arm\u003c\/th\u003e\n\u003ctd\u003eOptional, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm factor\u003c\/th\u003e\n\u003ctd\u003eSFF (2.5-inch) chassis only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eRefurbished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis kit fits 2U ProLiant chassis with 2.5-inch drive bays; HPE spares it as the 2U Easy Install SFF kit and sold it across the Gen9 and Gen10 2U two-socket servers. The LFF chassis of the same servers is deeper and takes 733662-B21. It mounts in 19-inch 4-post racks and accepts the optional 2U cable management arm. The kit carries no server tags on this page because HPE ties it to the chassis type rather than one model; match it to an SFF 2U chassis. Browse the full range in \u003ca href=\"\/collections\/rails-bezels-accessories\"\u003eRails, Bezels and Accessories\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Choose This\u003c\/h2\u003e\u003cp\u003eChoose this kit for a 2U SFF server you expect to service in the rack, which on a dense 24-bay chassis is most of them. If the chassis has 3.5-inch bays, use the LFF kit instead. Fair warning: the SFF and LFF kits look alike out of the box and differ in reach; a kit that is the wrong length will not latch at the rear, so check the drive form factor before ordering.\u003c\/p\u003e\u003cp\u003eEvery part we sell is tested and covered by our 180-day warranty. Volume pricing starts at 5 units, and our team at 1-800-778-1545 can quote a fleet refresh or a mixed parts order. Request a quote or add it to your cart; we confirm fit against your service tag before it ships.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":68138408804551,"sku":"K-0000028","price":32.4,"currency_code":"USD","in_stock":true}]},{"product_id":"hpe-1u-sff-easy-install-sliding-rail-kit-734811-b21","title":"HPE 1U SFF Easy Install Sliding Rail Kit 734811-B21","description":null,"brand":"HPE","offers":[{"title":"Default Title","offer_id":68138409033927,"sku":"K-0000029","price":32.4,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/wholesaleservers.com\/collections\/rails-bezels-accessories.oembed","provider":"Wholesale Servers","version":"1.0","type":"link"}