{"product_id":"dell-poweredge-r230-4-bay-3-5-chassis","title":"Dell PowerEdge R230 4-Bay 3.5\" Hot-Swap Drives [13th Gen]","description":"\u003cp\u003eThe Dell PowerEdge R230 4-Bay 3.5\" Hot-Swap is the production-oriented configuration of Dell's 13th-generation entry rack server. This refurbished single-socket 1U system runs one Intel Xeon E3-1200 v5 or v6 processor on the C236 chipset, takes up to 64 GB of DDR4 ECC unbuffered memory, and carries four hot-plug 3.5\" drive bays. It is built for small business, remote office, and branch office roles where the workload is light, the budget is tight, and field-replaceable storage matters.\u003c\/p\u003e\u003cp\u003eIt helps to be clear-eyed about the platform. The R230 launched in 2016 and is now roughly a decade old. It tops out at four cores, one socket, and a single non-redundant power supply. We stock it because it still earns a place in entry deployments and fleet standardization, not because it competes with current hardware. The sections below lay out where it fits, where it does not, and what to check before you commit.\u003c\/p\u003e\u003cp\u003eTo configure a build, call our team at 1-800-778-1545. Every R230 ships after a 12+ hour burn-in and carries our 180-day warranty, and volume pricing starts at 5 units. Tell us the workload and we will match the processor, memory, and controller to it.\u003c\/p\u003e\u003ch2\u003eWhere the R230 Fits in the Family\u003c\/h2\u003e\u003cp\u003eThe R230 is the entry rung of Dell's 13th-generation rack line, sitting below the R330, R430, and R630. Within the R230 itself we stock two chassis: this 4-Bay Hot-Swap and a 2-Bay cabled variant. The decision between them comes down to serviceability. Hot-plug bays let you pull and replace a failed drive without powering the system down, which is what makes this the production-appropriate R230 for any role where a disk failure should not become an outage.\u003c\/p\u003e\u003cp\u003eIf you do not need hot-swap and want the lowest possible entry price for a fixed, short-lifecycle build, the \u003ca href=\"\/products\/dell-poweredge-r230-2-bay-3-5-chassis\"\u003eDell PowerEdge R230 2-Bay 3.5\" Cabled chassis\u003c\/a\u003e is the leaner option. For everything else in this class, the 4-Bay Hot-Swap is the one we recommend.\u003c\/p\u003e\u003ch2\u003eStorage - 4 Hot-Swap 3.5\" Bays\u003c\/h2\u003e\u003cp\u003eFour hot-plug 3.5\" LFF bays, fed by a backplane that accepts SAS, SATA, and nearline SAS drives. With high-capacity nearline drives this chassis holds tens of terabytes of raw local storage, which is generous for an entry box. One caveat worth checking before you order: large modern drive capacities depend on the controller and its firmware, so validate large-drive support against the specific PERC you spec rather than assuming it.\u003c\/p\u003e\u003cp\u003eFor the operating system, there is no BOSS device on this platform. The clean approach is a mirrored pair across two of the front bays for a redundant boot volume, or an internal SD or vFlash card for appliance-style installs where the OS is small and disposable. On a 4-bay box every bay counts, so size the boot approach against how much data capacity you actually need.\u003c\/p\u003e\u003ch2\u003eStorage Controllers\u003c\/h2\u003e\u003cp\u003eThe R230 supports the PERC S130 software RAID stack through the chipset, the PERC H330 entry hardware controller (no cache), the PERC H730 (1 GB cache, battery-backed) for workloads that want write caching, and the PERC H830 for external SAS enclosures. There is an important platform constraint here: the R230 does not have a Mini Monolithic PERC slot and has no dedicated controller slot the way the R330 does. Any hardware RAID card is a full PCIe card that consumes one of the two riser slots.\u003c\/p\u003e\u003cp\u003eFor most entry deployments the \u003ca href=\"\/products\/perc-h330-raid-controller-pcie\"\u003ePERC H330 PCIe RAID controller\u003c\/a\u003e covers RAID 1 and RAID 10 cleanly and is the default we quote. Use S130 software RAID only for dev and test and light roles. Step up to the H730 when you want battery-backed write cache for a small RAID 5 or RAID 6 set. We do not recommend RAID 5 on large-capacity spinning disks in any case, on this platform or any other.\u003c\/p\u003e\u003ch2\u003eProcessors\u003c\/h2\u003e\u003cp\u003eOne LGA1151 socket, populated by a single Intel Xeon E3-1200 v5 (Skylake) or v6 (Kaby Lake) processor. Intel Core i3, Pentium, and Celeron parts are also supported for the lightest roles. The architectural ceiling is four cores and eight threads, with E3 parts landing in roughly the 25 W to 80 W TDP band, so a single standard heatsink handles cooling and there is no high-TDP heatsink decision to make.\u003c\/p\u003e\u003cp\u003eThe sweet spot for the workloads this box suits is the Xeon E3-1240 v6 at 4 cores and 8 threads and 3.7 GHz, which gives you the full core count and clock for file, infrastructure, and light application roles. Drop to the E3-1220 v6 to save cost where peak clock is not load-bearing, and reserve the Core i3 or Pentium options for genuinely minimal duties. If your workload wants more than four cores, the R230 is the wrong platform and you should move up a generation.\u003c\/p\u003e\u003ch2\u003eMemory\u003c\/h2\u003e\u003cp\u003eFour DIMM slots arranged as two channels of two, for a maximum of 64 GB of DDR4. This is the single most common configuration mistake we see on this platform, so it is worth stating plainly: the R230 takes ECC Unbuffered (UDIMM) memory only. Registered RDIMMs and load-reduced LRDIMMs, the modules used in the larger PowerEdge servers, will not work here and the system will not boot with them installed. There is no NVDIMM or Optane support.\u003c\/p\u003e\u003cp\u003eOperating speed runs up to DDR4-2400 MT\/s, stepping down to 2133, 1866, or 1600 depending on the processor and the selected system profile. For a balanced build we quote four 16 GB ECC UDIMMs for the full 64 GB. Where budget is the constraint, two 16 GB modules for 32 GB leave room to grow later.\u003c\/p\u003e\u003ch2\u003eNetworking and PCIe Expansion\u003c\/h2\u003e\u003cp\u003eNetworking is two onboard 1GbE RJ45 ports driven by a Broadcom 5720 controller. Note what is not here: the R230 has no Network Daughter Card slot, unlike the mainstream PowerEdge models. If you need 10GbE, additional ports, or SFP+ fiber, that comes from a PCIe network card, which consumes one of the two expansion slots.\u003c\/p\u003e\u003cp\u003eExpansion is two PCIe 3.0 slots on the riser: one x16 mechanical full-height slot wired x8 electrically, and one x8 low-profile slot wired x4 electrically. Plan slot usage carefully, because a PCIe RAID controller and a PCIe NIC together will use both slots. On an entry box, that is the real expansion ceiling.\u003c\/p\u003e\u003ch2\u003eGPU Support\u003c\/h2\u003e\u003cp\u003eThe R230 is not a GPU platform, and we do not quote GPUs in this chassis. A single non-redundant 250 W power supply and an entry 1U thermal design leave no power or cooling budget for an accelerator. If your workload needs even a single inferencing or transcoding GPU, this is the wrong server, and we would point you to a platform built for it rather than try to force a card into this chassis.\u003c\/p\u003e\u003ch2\u003eManagement - iDRAC8 Generation\u003c\/h2\u003e\u003cp\u003eRemote management is iDRAC8 with Lifecycle Controller. iDRAC8 Express is the default, and the iDRAC8 Enterprise upgrade adds full out-of-band remote console, virtual media, and the lights-out capability that makes a branch-office server manageable without a site visit. An optional 8 GB or 16 GB vFlash card and an optional TPM module round out the management and security options. This is the previous-generation controller, not iDRAC9, so the interface and feature set match the 13th-gen era.\u003c\/p\u003e\u003cp\u003eFor any deployment where the server lives somewhere without on-site hands, spec iDRAC8 Enterprise. The remote console alone usually pays for itself the first time you avoid a drive out to a remote site.\u003c\/p\u003e\u003ch2\u003ePower and Cooling\u003c\/h2\u003e\u003cp\u003eThis is the platform's defining reliability caveat, so we put it up front: the R230 ships with a single 250 W cabled power supply, 80 Plus Bronze rated, and it is non-redundant. There is no second PSU and no hot-swap power option on this chassis. A fully populated build of one E3 processor and four drives draws comfortably under that 250 W ceiling, so the supply is adequate, but it is a single point of failure. If PSU redundancy is a requirement, the R230 cannot meet it, and you should look at a platform that offers dual supplies.\u003c\/p\u003e\u003cp\u003eCooling is handled by the standard 1U fan arrangement. With no high-TDP processors and no GPUs in play, the thermal envelope is undemanding and ambient handling is straightforward for a normal rack environment.\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePSU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eRedundancy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eEst. peak draw\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle E3, 4 LFF drives, full RAM\u003c\/td\u003e\n\u003ctd\u003e250 W cabled, 80 Plus Bronze\u003c\/td\u003e\n\u003ctd\u003eNone (single PSU)\u003c\/td\u003e\n\u003ctd\u003eUnder 200 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePhysical Specs \u0026amp; Platform Notes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm factor:\u003c\/strong\u003e 1U rack, 42.8 mm high by 434 mm wide by 495 mm deep without bezel. This is a short-depth 1U that fits comfortably in shallow racks and branch cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCIe expansion:\u003c\/strong\u003e two PCIe 3.0 slots, one x16 full-height (x8 electrical) and one x8 low-profile (x4 electrical), as covered above.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParts availability:\u003c\/strong\u003e mature and plentiful. Drives, PSUs, and ECC UDIMMs for this platform are widely available on the secondary market. Dell factory support for the R230 has reached the end of its extended window, so third-party maintenance is the standard production support path in 2026.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessories we recommend:\u003c\/strong\u003e the standard security bezel (this entry chassis uses basic diagnostic LEDs rather than the LCD bezel found on mainstream PowerEdge models), a PCIe H330 for hardware RAID, and a tool-less rail kit. The \u003ca href=\"\/products\/dell-1u-a7-ready-rails-ii-sliding-rail-kit-r430-r630-r640\"\u003eDell 1U sliding rail kit for 12th, 13th, and 14th gen\u003c\/a\u003e fits this chassis for four-post mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform notes:\u003c\/strong\u003e no Mini Monolithic PERC slot, no Network Daughter Card slot, a single non-redundant PSU, and ECC UDIMM memory only. These are the four characteristics that most often surprise a buyer used to the larger PowerEdge models, so plan the build around them.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOur Assessment\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhere it excels:\u003c\/strong\u003e single-purpose entry roles that fit inside four cores and 64 GB. A branch-office file and print server, an Active Directory, DNS, or DHCP host, a small dedicated backup target, an edge or IoT gateway, a network appliance or firewall OS host, and dev and test nodes are all comfortable here. Hot-swap bays and iDRAC8 Enterprise make it a tidy, remotely manageable box for sites without on-site staff.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere to look instead:\u003c\/strong\u003e anything that needs PSU redundancy, more than four cores, more than 64 GB, registered memory, NVMe, or a GPU. For a current-generation entry server with the same footprint, see the \u003ca href=\"\/products\/dell-poweredge-r240-4-bay-3-5-chassis\"\u003eDell PowerEdge R240 4-Bay Hot-Swap (14th Gen)\u003c\/a\u003e or the newer \u003ca href=\"\/products\/dell-poweredge-r250-4-bay-lff-hotswap-build-your-own\"\u003eDell PowerEdge R250 4-Bay Hot-Swap (15th Gen)\u003c\/a\u003e, both of which add current support timelines and, on most configurations, a redundant power option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBottom line:\u003c\/strong\u003e buy the R230 4-Bay Hot-Swap when you are extending an existing R230 footprint, standardizing a low-cost branch or edge fleet, or you need an inexpensive hot-swap-capable 1U for a short, well-defined lifecycle. For a net-new multi-year deployment, the modest premium for a current-generation entry server is usually the smarter procurement decision, and we are happy to quote both so the numbers are in front of you.\u003c\/p\u003e\u003ch2\u003eWhere the R230 Fits in 2026\u003c\/h2\u003e\u003cp\u003eThe R230 is a 13th-generation platform that is now about ten years past its introduction. Dell factory support has effectively wound down, which is normal for hardware of this age and not a reason to avoid it, provided you go in with eyes open and plan third-party maintenance for production roles. Realistically, this is a server to buy for a defined two to four year light-duty role, not a decade-long bet.\u003c\/p\u003e\u003cp\u003eThe honest framing is simple. If cost per box and consistency with an existing R230 fleet are what matter most, the R230 still makes sense. If you are starting fresh and expect to run the box hard or for many years, put the small generational premium toward a newer platform.\u003c\/p\u003e\u003ch2\u003eHonest Limitations\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSingle non-redundant 250 W power supply. There is no PSU redundancy on this platform at all.\u003c\/li\u003e\n\u003cli\u003eFour-core ceiling. One socket, a maximum of four cores and eight threads.\u003c\/li\u003e\n\u003cli\u003e64 GB memory ceiling, and ECC Unbuffered memory only. Registered RDIMMs will not work.\u003c\/li\u003e\n\u003cli\u003eOnly two PCIe slots, and a RAID controller or a 10GbE NIC consumes them. No Network Daughter Card, no Mini Monolithic PERC slot.\u003c\/li\u003e\n\u003cli\u003eNo NVMe, no BOSS boot card, and no GPU support.\u003c\/li\u003e\n\u003cli\u003eA 13th-generation platform near the end of vendor support. Plan for third-party maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWorkload Fit\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRight for\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eConsider alternatives for\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBranch-office file and print\u003c\/td\u003e\n\u003ctd\u003eVirtualization hosts with high VM density\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive Directory, DNS, DHCP\u003c\/td\u003e\n\u003ctd\u003eDatabases needing more than 64 GB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall dedicated backup target\u003c\/td\u003e\n\u003ctd\u003eAny role requiring PSU redundancy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEdge and IoT gateway\u003c\/td\u003e\n\u003ctd\u003eNVMe all-flash storage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDev and test and lab nodes\u003c\/td\u003e\n\u003ctd\u003eGPU compute or transcoding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirewall or network OS host\u003c\/td\u003e\n\u003ctd\u003eWorkloads needing more than four cores\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhere to Look Instead\u003c\/h2\u003e\u003cp\u003eFor a same-class server on a current platform, the \u003ca href=\"\/products\/dell-poweredge-r240-4-bay-3-5-chassis\"\u003eDell PowerEdge R240 4-Bay Hot-Swap (14th Gen)\u003c\/a\u003e is the direct step up, moving to Intel Xeon E-2100 and E-2200 processors with current support timelines. Two generations forward, the \u003ca href=\"\/products\/dell-poweredge-r250-4-bay-lff-hotswap-build-your-own\"\u003eDell PowerEdge R250 4-Bay Hot-Swap (15th Gen)\u003c\/a\u003e is the newest entry platform in this line. If you do not need hot-swap bays, the \u003ca href=\"\/products\/dell-poweredge-r230-2-bay-3-5-chassis\"\u003eDell PowerEdge R230 2-Bay 3.5\" Cabled chassis\u003c\/a\u003e is the lower-cost cabled companion.\u003c\/p\u003e\u003cp\u003eThe closest HPE counterpart in this class is the ProLiant DL20 Gen9, which shares the single-socket Xeon E3-1200 v5 and v6 design. The R230 is our entry floor in the Dell rack line, so there is no lower-tier model below it to step down to.\u003c\/p\u003e\u003ch2\u003eReady to Configure?\u003c\/h2\u003e\u003cp\u003eTell us the workload and we will spec the right R230 build, from processor and memory to controller and rails. Call 1-800-778-1545 or request a quote and we will return formal pricing within 24 hours. Every unit ships after a 12+ hour burn-in, carries a 180-day warranty, and volume pricing begins at 5 units. We will gladly quote the R240 or R250 alongside it so you can weigh the cost of staying on 13th gen against moving to a current-generation entry server.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951274680519,"sku":"BP-012001","price":216.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/server-design-lab-dell-poweredge-r230-4-bay-35-hotswap-drives-348999.png?v=1765539695","url":"https:\/\/wholesaleservers.com\/products\/dell-poweredge-r230-4-bay-3-5-chassis","provider":"Wholesale Servers","version":"1.0","type":"link"}