{"product_id":"dell-poweredge-t360-4-bay-3-5-chassis","title":"CONFIGURE \u0026 QUOTE - Dell PowerEdge T360 4-Bay 3.5\" Tower [16th Gen: New]","description":"\u003cp\u003eThe Dell PowerEdge T360 4-Bay 3.5\" Hot-Swap is the smaller-capacity LFF configuration of Dell's 16th-generation entry-tier single-socket tower platform: four 3.5\" hot-plug front bays paired with the same Xeon E-2400 or Xeon 6300 series single-socket compute envelope, DDR5 UDIMM memory, and PCIe Gen5 expansion as the rest of the T360 family. This is the right T360 chassis variant for very small SMB deployments, branch-office file servers with modest storage needs, and entry-tier workloads where 4 LFF bays is genuinely the right capacity envelope.\u003c\/p\u003e\u003cp\u003eFor full T360 platform documentation — single-socket Xeon E-2400 \/ Xeon 6300, 4 DDR5 UDIMM slots, 128 GB memory ceiling, PCIe Gen5, BOSS-N1 boot, 1 single-width 60W GPU envelope, iDRAC9, the entry-tier positioning, and the T360 vs. T560 step-up discussion — see the canonical \u003ca href=\"\/products\/dell-poweredge-t360-8-bay-3-5-chassis\"\u003eT360 8-Bay 3.5\" page\u003c\/a\u003e. This page focuses on what's specific to the 4-Bay chassis variant.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eWhat's Different About This Chassis\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf the LFF bay count.\u003c\/strong\u003e 4 LFF bays vs. 8 on the canonical T360 8-Bay. For deployments that genuinely fit in 4 large drives, the 4-Bay is the lower-cost chassis variant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower capacity ceiling.\u003c\/strong\u003e 4 x 22 TB = 88 TB raw maximum on NL-SAS HDDs; 4 x 16 TB = 64 TB raw on SATA HDDs. Approximately 44-66 TB usable at RAID 6 with one hot spare. For deployments where 60-90 TB raw is the upper bound of expected capacity needs, the 4-Bay is sufficient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame T360 platform envelope underneath.\u003c\/strong\u003e Single-socket Xeon E-2400 \/ Xeon 6300, 4 DDR5 UDIMM slots, 128 GB memory ceiling, PCIe Gen5 expansion, 1 single-width 60W GPU support, BOSS-N1 NVMe boot. The platform underneath is identical to the 8-Bay; only the front backplane drive count differs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower entry cost than 8-Bay.\u003c\/strong\u003e The chassis cost difference is modest (4 fewer drive bays, slightly less aggressive cooling for the smaller drive count); the meaningful savings comes from not procuring 4 additional drives at SMB-tier capacity prices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCannot be field-converted to 8-Bay.\u003c\/strong\u003e The chassis backplane and drive cage are specific to the 4-Bay configuration. If you outgrow the 4-Bay, the upgrade path is a new server (8-Bay T360 or step up to T560), not a backplane swap.\u003c\/li\u003e\n\u003c\/ol\u003e\u003chr\u003e\u003ch2\u003eStorage — 4 LFF Bays\u003c\/h2\u003e\u003cp\u003eFour 3.5\" SAS\/SATA hot-swap front bays. The 4-Bay backplane is SAS\/SATA only; no NVMe path on this chassis variant.\u003c\/p\u003e\u003cp\u003eCommon 4-Bay configurations:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSATA HDDs (4-22 TB):\u003c\/strong\u003e The volume entry-tier SMB and ROBO file server configuration. RAID 6 with 4 drives = 2 data + 2 parity. RAID 5 with 4 drives = 3 data + 1 parity. RAID 10 with 4 drives = 2 mirrored pairs striped (2 drives usable, best random IOPS). RAID 6 is the recommended default at 8 TB+ drive sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNL-SAS HDDs (4-22 TB):\u003c\/strong\u003e Mid-tier reliability and dual-port redundancy. For deployments where SAS-grade drives are required by procurement policy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAS 10K \/ 15K HDDs:\u003c\/strong\u003e Higher random IOPS at lower per-drive capacity. Modest fit for the 4-Bay chassis since the use case is usually capacity-primary.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAS \/ SATA SSDs:\u003c\/strong\u003e 3.5\" SSDs are rarely the right call (per-TB cost is high vs. 2.5\" SSDs in adapter caddies, which require a different chassis variant). For SSD-primary deployments, the alternative T360 chassis configurations are the right path.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBOSS-N1 standard for OS boot.\u003c\/strong\u003e 2 x M.2 NVMe SSDs in hardware RAID 1, separate from the 4 front bays. All 4 front bays remain available for data.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRAID 6 mandatory at 12+ TB drive sizes.\u003c\/strong\u003e Same rebuild-window math as the 8-Bay: single-drive rebuild on 16-22 TB NL-SAS can exceed 24 hours. RAID 6 with 2 parity drives in a 4-drive array leaves only 2 data drives, which is meaningful capacity sacrifice; at the smallest drive sizes (4-8 TB), RAID 10 may be the right call (2 drives usable but excellent rebuild characteristics and full random-IOPS performance). At drive sizes above 12 TB, RAID 6 is the only defensible RAID level.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eRAID Considerations Specific to 4-Bay Arrays\u003c\/h2\u003e\u003cp\u003e4-bay arrays have less parity overhead flexibility than 8-bay or 12-bay arrays. RAID configuration becomes a more pointed decision:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRAID 6 at small drive counts:\u003c\/strong\u003e 4 drives in RAID 6 = 2 data + 2 parity. Capacity efficiency is 50%. Acceptable when fault tolerance is the primary design driver and capacity is secondary.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRAID 5 at small drive sizes:\u003c\/strong\u003e 4 drives in RAID 5 = 3 data + 1 parity. 75% capacity efficiency. Defensible at drive sizes under 8 TB where rebuild times remain reasonable. NOT defensible at 12+ TB drive sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRAID 10 for performance:\u003c\/strong\u003e 4 drives in RAID 10 = 2 mirrored pairs striped. 50% capacity efficiency. Excellent random IOPS. The right call for small database servers or write-heavy workloads where capacity is not the primary driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRAID 1 for boot mirror equivalent:\u003c\/strong\u003e If the 4-Bay is being used as 2 separate RAID 1 mirrors (1 mirror for OS, 1 mirror for data, no boot module needed elsewhere), this is a valid configuration. BOSS-N1 makes this configuration unnecessary in most cases.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor the typical 4-Bay T360 deployment (SMB file server with bulk capacity), RAID 6 at 4-12 TB drive sizes is the recommended configuration, accepting the 50% capacity overhead in exchange for two-drive fault tolerance.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003ePower Supplies\u003c\/h2\u003e\u003cp\u003eThe 4-Bay configuration draws less peak power than the 8-Bay variant (fewer active drives). PSU options span the T360 range:\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eWorkload Profile\u003c\/th\u003e\n\u003cth\u003eTypical Draw\u003c\/th\u003e\n\u003cth\u003ePSU Recommendation\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight: Pentium or low-tier Xeon E-2400, 32 GB RAM, 2-3 LFF drives\u003c\/td\u003e\n\u003ctd\u003e80-130W\u003c\/td\u003e\n\u003ctd\u003e1 x 450W cabled (non-redundant) or 2 x 600W Titanium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBalanced: Xeon E-2436, 64 GB RAM, 4 LFF drives\u003c\/td\u003e\n\u003ctd\u003e130-210W\u003c\/td\u003e\n\u003ctd\u003e2 x 600W Titanium redundant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeavy: Xeon E-2488, 128 GB RAM, 4 LFF drives + A2 GPU\u003c\/td\u003e\n\u003ctd\u003e210-340W\u003c\/td\u003e\n\u003ctd\u003e2 x 700W Titanium redundant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003ePSU recommendation: 2 x 600W Titanium hot-swap redundant covers most 4-Bay T360 deployments at meaningfully lower cost than the 700W tier and with operational PSU redundancy that the 450W cabled configuration lacks.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eWorkload Patterns\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eBranch-office file server (under 30 users):\u003c\/strong\u003e The most common 4-Bay T360 deployment. 4 x 8-12 TB NL-SAS at RAID 6 = 16-24 TB usable. Standard 1 GbE LOM networking. 32-64 GB memory. Xeon E-2414 or E-2436 CPU. Sufficient for SMB file-sharing workloads where the 8-Bay is over-provisioned.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDepartmental backup target:\u003c\/strong\u003e 4 x 14-18 TB SATA HDDs at RAID 6 = 28-36 TB usable. Suitable for departmental Veeam \/ Commvault deployment targets where data volume is small.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSmall-office application server:\u003c\/strong\u003e Xeon E-2436 or E-2486 CPU, 64-128 GB memory, 4 SAS SSDs at RAID 10 for hot application data plus BOSS-N1 boot. For small-business line-of-business applications where IOPS matter more than capacity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePrint server \/ utility infrastructure:\u003c\/strong\u003e Pentium G7400 CPU, 32 GB memory, 4 SATA HDDs at RAID 5 or RAID 1+0 pairs. For very-low-utilization utility roles where the T360 is the right form factor and 4 bays is more than enough.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEntry-tier edge inference node:\u003c\/strong\u003e Xeon E-2436 CPU, 64 GB memory, 4 SATA SSDs at RAID 10 for local model storage, 1x NVIDIA A2 GPU for inference. For retail analytics, manufacturing quality control, or branch-office computer vision at entry-tier scale.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eWhen to Pick a Different Chassis\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed 8 LFF bays?\u003c\/strong\u003e → \u003ca href=\"\/products\/dell-poweredge-t360-8-bay-3-5-chassis\"\u003eT360 8-Bay 3.5\"\u003c\/a\u003e (canonical T360 variant).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed more than 128 GB memory?\u003c\/strong\u003e → \u003ca href=\"\/products\/dell-poweredge-t560-12-bay-3-5-chassis\"\u003eT560 12-Bay 3.5\"\u003c\/a\u003e (16th gen dual-socket tower, 1 TB+ memory ceiling).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed dual-socket compute?\u003c\/strong\u003e → \u003ca href=\"\/products\/dell-poweredge-t560-12-bay-3-5-chassis\"\u003eT560 12-Bay 3.5\"\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed more than 8 cores compute?\u003c\/strong\u003e → \u003ca href=\"\/products\/dell-poweredge-t560-12-bay-3-5-chassis\"\u003eT560 12-Bay 3.5\"\u003c\/a\u003e (up to 64 cores per socket on Emerald Rapids).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed serious GPU acceleration?\u003c\/strong\u003e → \u003ca href=\"\/products\/dell-poweredge-t560-12-bay-3-5-chassis\"\u003eT560\u003c\/a\u003e (up to 2 x 300W double-wide GPUs) or R760 rack platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1U rack form factor preferred?\u003c\/strong\u003e → R360 (16th gen 1U single-socket rack, not currently stocked at Wholesale Servers; contact us).\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eOur Assessment\u003c\/h2\u003e\u003cp\u003eThe T360 4-Bay 3.5\" is the right call for very small SMB, ROBO, and near-edge deployments where 4 LFF bays is genuinely the right capacity envelope and the rest of the T360 platform (single-socket Xeon E-2400, 128 GB memory ceiling, 1 single-width 60W GPU envelope) matches the workload. Branch-office file servers under 30 users, departmental backup targets at small scale, print servers, and entry-tier utility infrastructure are the canonical 4-Bay T360 deployments.\u003c\/p\u003e\u003cp\u003eWhere it falls short of the right answer: deployments at any chance of growing beyond 4 LFF bays during the server's productive life. The chassis cannot be field-converted to 8-Bay; the upgrade path is replacement. If there is any meaningful chance of capacity growth, the 8-Bay T360 at procurement is cheaper than a chassis swap in 2-3 years. The 4-Bay is the right call when capacity needs are demonstrably bounded.\u003c\/p\u003e\u003cp\u003eBottom line: this is the entry-tier T360 chassis for entry-tier capacity workloads. Buy this when 4 LFF bays is the demonstrably correct answer to a known workload. If growth is plausible, the 8-Bay canonical is the right procurement decision.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eWorkload Fit\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eExcels at ✅\u003c\/th\u003e\n\u003cth\u003eWhere to look elsewhere ❌\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e✅ Branch-office file server (under 30 users)\u003c\/td\u003e\n\u003ctd\u003e❌ More than 4 LFF bays needed (use T360 8-Bay)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e✅ Departmental backup targets (small scale)\u003c\/td\u003e\n\u003ctd\u003e❌ More than 128 GB memory required (use T560)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e✅ Small-office application server with SAS SSDs at RAID 10\u003c\/td\u003e\n\u003ctd\u003e❌ Dual-socket compute required (use T560)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e✅ Print server \/ utility infrastructure\u003c\/td\u003e\n\u003ctd\u003e❌ More than 8 cores compute (use T560)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e✅ Entry-tier edge inference (Xeon E-2400 + A2 GPU)\u003c\/td\u003e\n\u003ctd\u003e❌ Serious GPU acceleration (use T560 or R760)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e✅ Very small SMB primary servers\u003c\/td\u003e\n\u003ctd\u003e❌ Capacity growth plausible (use T360 8-Bay at procurement)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003chr\u003e\u003ch2\u003eHonest Limitations\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 LFF bays is the ceiling on this chassis.\u003c\/strong\u003e Cannot be field-converted to 8-Bay. Plan capacity at procurement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRAID 6 leaves only 2 data drives.\u003c\/strong\u003e 4-drive RAID 6 = 50% capacity overhead. Acceptable when fault tolerance is the primary design driver; capacity-sensitive deployments may need to reconsider RAID level or step up to 8-Bay.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll T360 platform limits apply.\u003c\/strong\u003e 128 GB UDIMM memory ceiling, 8-core CPU ceiling, 1 single-width 60W GPU envelope, no OCP 3.0, no DLC, iDRAC9 Basic standard (Enterprise upgrade recommended). See the \u003ca href=\"\/products\/dell-poweredge-t360-8-bay-3-5-chassis\"\u003eT360 8-Bay 3.5\" canonical page\u003c\/a\u003e for the full discussion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNVMe does not support hardware RAID on this platform.\u003c\/strong\u003e Per Dell's T360 specification. The 4-Bay 3.5\" chassis has no direct-attached NVMe slots anyway.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower capacity envelope means less RAID flexibility.\u003c\/strong\u003e 4-bay arrays have less parity-overhead flexibility than 8-bay or 12-bay arrays. RAID configuration becomes a more pointed decision; capacity-vs-fault-tolerance tradeoffs are sharper at low drive counts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo path to add NVMe.\u003c\/strong\u003e The 4-Bay 3.5\" chassis variant does not support the direct-attached NVMe slot configuration that some other T360 chassis variants offer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCost saving over 8-Bay is modest.\u003c\/strong\u003e The chassis hardware cost difference is small; the meaningful savings comes from not procuring 4 additional drives. For deployments where 8 drives is plausible within the server lifecycle, that small chassis savings is not worth the future replacement cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eGeneration Context\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003evs. T350 4-Bay 3.5\" (15th gen Rocket Lake predecessor):\u003c\/strong\u003e The T360 4-Bay brings DDR5 memory (vs. DDR4), PCIe Gen5 (vs. Gen4), BOSS-N1 NVMe boot (vs. BOSS-S1 SATA), 16th gen security baseline, and Intel Xeon E-2400 series (vs. E-2300). Generational performance and security improvements are meaningful at the entry tier. For deployments at the T350's envelope that need 16th gen currency, the T360 4-Bay is the upgrade path; for cost-primary procurement, the T350 remains valid at refurbished pricing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003evs. T360 8-Bay 3.5\" (canonical T360 sibling):\u003c\/strong\u003e Same platform; 4 fewer LFF bays. For deployments where 4 bays is enough, the 4-Bay is lower cost. For deployments where capacity might grow, the 8-Bay at procurement is cheaper than chassis replacement later. The decision is purely about capacity certainty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003evs. T560 (16th gen mid-range dual-socket tower):\u003c\/strong\u003e The T560 is the step up when T360 platform constraints bite (more than 128 GB memory, more than 8 cores, dual-socket required, serious GPU). For workloads at the T360 4-Bay envelope that are clearly bounded there, T360 is the cost-correct call. For workloads that might grow beyond T360 constraints, T560 at procurement is meaningful future-proofing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003evs. R360 (16th gen 1U rack equivalent):\u003c\/strong\u003e Same processor support and platform envelope in 1U rack form factor. For deployments where rack infrastructure is available and the tower form factor is not required, the R360 saves U-space. For office and branch-office deployments without rack infrastructure, the T360 4-Bay tower is the right form factor.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eReady to Configure?\u003c\/h2\u003e\u003cp\u003eTell us your workload, target memory capacity, drive count and capacity per drive (4 drives max on this chassis), RAID requirement, GPU need (if any A2-class inference), networking speed requirement, and quantity. We respond within 24 hours. Volume pricing applies at 5 units and above.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing for capacity certainty:\u003c\/strong\u003e If your workload is demonstrably bounded at 4 LFF bays, the T360 4-Bay is the right call. If there is any plausible chance of growing beyond 4 drives during the 3-5 year server lifecycle, we will quote the \u003ca href=\"\/products\/dell-poweredge-t360-8-bay-3-5-chassis\"\u003eT360 8-Bay\u003c\/a\u003e alongside for comparison.\u003c\/p\u003e\u003cp\u003eEvery Wholesale Servers T360 ships after a 12+ hour burn-in test covering every PCIe slot, every memory channel, and every drive bay. Standard 180-day warranty included; 1-Year, 2-Year, and 3-Year Premium warranty options available. New-server pricing with Dell manufacturer warranty available on select configurations. Call 1-800-778-1545 or use the quote form on this page.\u003c\/p\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":45951456280775,"sku":"LM-OTES-NQRG","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4493\/0247\/files\/dell-poweredge-t360-8-bay-35-chassis-6095850.jpg?v=1765539927","url":"https:\/\/wholesaleservers.com\/products\/dell-poweredge-t360-4-bay-3-5-chassis","provider":"Wholesale Servers","version":"1.0","type":"link"}