Dell PowerEdge T430 8-Bay 3.5"
Configure Your System:
1 Processor Required
Step 1: Choose a series
Intel Xeon E5-2600 v3 (Haswell) is the value play. Mature, plentiful, and the lowest cost per core we sell. Memory runs at 2133 MT/s.
Intel Xeon E5-2600 v4 (Broadwell) is the same socket a die shrink later: more cores, better performance per watt, and 2400 MT/s memory support. The price gap has narrowed enough that v4 is our default recommendation; take v3 when the budget is the whole story.
This list stops at 120W, which is deliberate: the T430's tower cooling is tuned for quiet, and the menu stays inside what it handles gracefully. Nothing above that line belongs in this server's natural workload anyway.
Step 2: Choose your CPU
The T430 is the office server that lives with people: file, print, domain, backup, and a few virtual machines, running quietly in the corner it was bought for.
Running Windows Server 2022? Two 8-core CPUs land exactly on the 16-core base license. Our pick for this chassis is the E5-2620 v4 (8 cores): honest performance for office duty at the lowest cost, and the license covers the pair with nothing wasted.
A single CPU is genuinely defensible here for light duty; just know it halves the memory channels and PCIe lanes, so take the second socket if virtualization is anywhere on the roadmap.
Mid-range v4 parts in the 2650 range cover heavier consolidation.
Fair warning: a 13th generation platform is a value play, not a performance play. If per-core licensing or single-thread speed is load-bearing, newer silicon can cost less overall, and we will tell you so at quote time if that is your situation.
2 Heat Sink Optional
The tower format is the T430's whole cooling advantage: big, slow fans moving air through a roomy chassis. That is why this server can sit in an office corner without announcing itself, and why it tolerates ordinary room temperatures better than any rack chassis of its generation.
What still matters: keep drive bay blanks and internal shrouds installed so air goes where it should, give the intake some breathing room rather than pushing the tower flush into a cabinet, and keep it out of direct sun and server-closet heat traps. Do that and the T430 will be the quietest thing in the room that is doing real work.
3 Memory (RAM) 12 DIMM slots, modules added in sets of 2 Required
Eight DIMMs (four per socket) populates every channel once and runs memory at full speed: 2400 MT/s with v4 processors, 2133 with v3. This is our default, and for the T430's natural office workload it is usually the whole conversation.
All twelve slots is the capacity play. The extra DIMMs double up two of the four channels, a slightly unbalanced layout the platform handles fine; you trade a little bandwidth symmetry for 50 percent more capacity. Take it when RAM is the constraint.
Whichever count you choose, buy it as one matched set, now. The instinct to leave slots open for a later upgrade rarely plays out well: a year from now you are hunting for DIMMs that match the rank and speed of what is in the box, and a mismatch either clocks the whole server down or refuses to train. The server is in production by then, so adding memory means a maintenance window you have to schedule and justify.
Common landing spots: 64 GB (8x 8 GB) for file, print, and domain duty, 128 GB (8x 16 GB) is our default for an office server that also virtualizes a few machines, and 192 GB (12x 16 GB) when capacity outranks everything else.
4 RAID Controllers Optional
PERC H730P (2 GB battery-backed cache) is the configurator default and our pick when the bays are full of big spinning drives. Parity RAID on large disks generates real write traffic, and the cache is the difference between an array that performs and one that merely functions.
PERC H730 (1 GB cache) is a fair savings on a lighter build with modest write load.
PERC H330 has no cache. It handles RAID 1 mirrors and light duty, and nothing else well. On a simple office server running a mirrored pair it is defensible; do not put it in front of a parity array you care about.
Building ZFS or TrueNAS and want the drives passed straight through? The tower list here is RAID controllers only, so call us at 1-800-778-1545 and we will spec the right host bus adapter for that build.
Array guidance regardless of controller: RAID 6 over RAID 5 on large spinning drives, no exceptions, plus a hot spare if you can spare the bay.
5 Storage Drives Select up to 8 drives (0/8 Slots Used) Optional
The 3.5" T430 is the office storage play. Large NL-SAS and SATA spinning drives deliver cost per terabyte no SSD matches, and eight of them cover file shares, backups, and archives for most offices with room to spare. 2.5" drives fit these bays in adapters, so a small SSD tier alongside the big drives is available where a database or VM volume needs the speed.
Buy new. We steer you away from refurbished on drives specifically, and we say that as a company that sells refurbished servers all day. Rebuilds on large drives run long, and a rebuild is exactly when you do not want a second drive with unknown hours in the array.
The RAID math on big spinning drives is non-negotiable: RAID 6 over RAID 5, plus a hot spare if you can spare the bay. A large-drive RAID 5 array is a rebuild failure waiting for its moment, and RAID 5 does not survive one.
The T430 predates Dell's dedicated boot card, so plan the boot volume deliberately: a small RAID 1 SSD pair in two bays (2.5" drives in adapters) is the standard pattern. It costs you two bays and it is worth it; a boot failure and a data failure should never be the same event.
6 Remote Access Required
The dividing line is the remote console. iDRAC8 Enterprise gives you remote KVM and virtual media, meaning you can reach the server's screen, mount an ISO, and rebuild an OS from anywhere, even when the operating system is down. Express does not include the remote console, so any problem below the OS level means walking to the server.
Here is the honest tower-specific take: a T430 usually sits in the same building as the person who manages it, and Express is genuinely fine for that life. If the server is down the hall, save the money.
Enterprise earns its cost the moment that stops being true: a branch office server managed from headquarters, an IT consultant supporting the box remotely, or any site without its own technical person. In those cases the license costs a fraction of one site trip.
One honest note on age: iDRAC8's interface is a product of its era, and some functions lean on older browser technology than iDRAC9 does. It works, we use it daily, but budget a few minutes of setup patience.
If you are deploying 5 or more units across sites, take Enterprise on all of them. Fleet management without remote console access does not work in practice.
7 Power Supply 2x included in build Required
2x 750W is the configurator default, and on this chassis it is the comfortable middle: any processor pair we sell, a full set of DIMMs, and a bay of drives all land inside it with the 50 percent load target intact, where a PSU runs at peak efficiency, runs cooler, and keeps its fans slow. In a server that lives with people, quiet fans are a feature you will hear the absence of.
2x 495W is the budget option and honestly covers a light build: single or modest dual CPUs, moderate memory, a few drives.
2x 1100W is rarely necessary on this chassis and exists for the heaviest corner cases.
Watch the estimated TDP counter at the bottom of the page as you add components to see where your build lands, and when it sits between two tiers, size up; the price difference is a rounding error against the headroom you get back.
8 Network Cards Required
Where the embedded ports stop being enough: shared storage that other servers mount, a virtualization host with real traffic, or backup jobs racing a window. For those, a 10 Gb PCIe network card is the upgrade path, and the tower has slots to spare.
If you go that route, match the port type to your switch. SFP+ ports take fiber or DAC cables and talk to datacenter-grade switches; BASE-T ports are 10 Gb copper on ordinary RJ45. Neither is better; they must simply match what you own. Order SFP+ against a copper-only switch and the server arrives with nothing to plug into.
Need a card added to your build, or unsure whether your workload will outgrow gigabit? Call 1-800-778-1545 and we will spec the whole path, switch ports included.
9 Operating System Required
First, an honest compatibility note for this platform. Windows Server 2025 is not certified for this processor generation, and current VMware ESXi releases no longer support it. A 13th generation server is a value platform, and the right OS choices lean the same way.
Windows Server 2022 is the version to buy, and for the T430's natural role as the office server, it is the default choice. Standard licensing is per core with a 16-core base, which is why our processor guidance steers Windows buyers to two 8-core CPUs: the 16-Core license covers that build exactly. On CALs, count your users and round up.
Fair warning on Evaluation Editions: free and fully functional for 180 days, then they expire. Right for labs and proof-of-concept, wrong for production.
VMware: we will install ESXi on request for hosts joining an existing licensed cluster, but we do not recommend starting a new VMware deployment on this platform given the support status.
Proxmox VE turns the T430 into a capable small virtualization host with no per-core license math and full current support on this hardware; for an office consolidating a few aging machines, it is the honest modern answer.
Ubuntu Server LTS covers Linux application duty with five years of free updates, and TrueNAS makes a fine quiet office storage appliance under the No OS option; ask us about the right controller for that build.
Not sure which fits? Tell us the workload at quote time, or call 1-800-778-1545.
WServer Warranty
Dell PowerEdge T430 8-Bay 3.5" Tower [13th Gen] Detailed Review
The refurbished Dell PowerEdge T430 8-Bay 3.5" is Dell's 13th-generation mid-range tower server: eight 3.5" hot-swap LFF front bays alongside dual-socket Intel Xeon E5-2600 v3/v4 compute, 12 DDR4 DIMM slots, PERC H730P RAID, and iDRAC8 Enterprise. It is the tower equivalent of the R430 and R530 rack platforms in the same generation, configured for floor deployment in office and remote-office environments where rack infrastructure is not available or appropriate.
In 2026, the T430 is the cost-correct call for small-business primary servers, branch-office tower deployments, professional-services firms (legal, accounting, medical practice), retail back-office workhorses where rack infrastructure is not justified, and tower-format virtualization for SMB. This is the main T430 reference page on Wholesale Servers; the T430 16-Bay 2.5" SFF companion shares this platform and differs only in drive form factor. For the shared 13th-gen platform vocabulary it draws on, see the Dell PowerEdge R630 10-Bay 2.5" platform reference.
To configure a build or request volume pricing, call 1-800-778-1545 or use the quote form on this page; volume pricing applies at 5 units and above. Every unit ships after a 12+ hour burn-in test and carries a 180-day warranty.
Where the T430 Fits in the Family
The T430 is the tower member of Dell's 13th-generation E5-2600 v3/v4 platform. It shares its compute, memory architecture, controllers, and management with the R430, R530, R630, and R730 rack servers, but trades rack density for floor-standing deployment, office-grade acoustics, and standard office power.
- vs. the 16-Bay 2.5" SFF companion: Same platform, different storage form factor. The 8-Bay LFF (this page) is the capacity-tier choice for large 3.5" NL-SAS drives; the SFF companion is the performance-tier choice for dense 2.5" SAS SSDs.
- vs. the T630: The T630 is the larger 13th-gen tower with 24 DIMM slots, a 1.5 TB memory ceiling, more PCIe slots, and support for multiple GPUs. The T430 is the right call when the workload fits inside 12 DIMM slots and a single GPU.
- vs. the rack R430 / R730: When a rack and datacenter cooling exist, the rack platforms are more space-efficient. The T430 earns its place specifically when tower form factor is the requirement.
- vs. the T440: The T440 is the 14th-gen tower successor with iDRAC9, DDR4-2666, and the BOSS-S1 boot module. The T430 is the budget-correct alternative when 14th-gen platform currency is not worth the premium.
Storage: 8 LFF Bays
Eight 3.5" SAS/SATA hot-swap front bays. The 8-Bay LFF chassis is built for capacity-tier storage as the volume tower use case: SMB file servers, departmental backup targets, small NAS deployments, and any tower workload where bulk capacity is the storage requirement. Maximum raw capacity is roughly 160 TB with eight 20 TB NL-SAS drives.
Common 8-Bay 3.5" LFF configurations
- 8 x 4-8 TB NL-SAS HDD: Volume SMB file server. 32-64 TB raw, roughly 20-40 TB usable at RAID 6 with a hot spare. The general-purpose primary file storage build.
- 8 x 12-16 TB NL-SAS HDD: Higher-capacity SMB or branch deployments. 96-128 TB raw, roughly 60-80 TB usable at RAID 6 with a hot spare.
- 8 x 20 TB NL-SAS HDD: Maximum-capacity 8-bay build. 160 TB raw, roughly 104 TB usable at RAID 6 with a hot spare.
- 8 x SAS 10K/15K HDD: Legacy performance-tier spinning disk for SMB application servers (Sage, QuickBooks Enterprise, custom line-of-business apps).
- 2 x SAS SSD boot mirror + 6 x SAS HDD data: Mixed-tier build with SSD boot and HDD capacity. Strong for SMB application servers needing a fast OS volume and modest data.
- 2.5" SSDs in 3.5" adapter carriers: Useful when the 8-Bay LFF chassis is the constraint but some SSD performance is wanted.
RAID guidance for 8-Bay LFF arrays
RAID 6 is mandatory at 12 TB and larger drive sizes because single-parity rebuild risk on large drives is too high. RAID 5 is acceptable below 8 TB where rebuild times stay tolerable. RAID 10 is the call for write-heavy configurations where capacity is secondary: 50% overhead, excellent write performance, fast rebuild. For most T430 builds with 4-12 TB NL-SAS, RAID 6 with a hot spare is the right answer.
Boot drive options
The T430 has no BOSS module support. Boot options for the 8-Bay chassis are a 2-drive RAID 1 SSD mirror in LFF adapter carriers (consumes 2 of 8 bays), internal SSD mounts on configurations that support them (preserves all 8 front bays, verify at quote time), IDSDM dual SD card for hypervisor-only installs, or internal USB. For full-OS Windows Server or Linux, the front-bay mirror is the volume path and leaves 6 data bays, which is acceptable for most SMB workloads.
Storage Controllers
The T430 uses the same 13th-gen PERC controller family as the R430 and R630. We quote by workload, not by default:
- PERC H730P (2 GB cache, battery-backed): The production storage default for the T430. The right call for write-intensive or transactional SMB workloads where local storage matters.
- PERC H730 (1 GB cache, battery-backed): A defensible budget option for read-heavy or modest-write arrays. Half the cache of the H730P; quote it when budget is the constraint and write performance is not load-bearing.
- PERC H330 (no cache): Entry-tier hardware RAID for light workloads and small drive counts. Adequate for a basic file server, not for write-heavy arrays.
- HBA330 (pass-through HBA): The choice for software-defined storage stacks (Storage Spaces, ZFS, Ceph) that want raw disk access rather than hardware RAID.
- S140 (software RAID via chipset): Dev/test and very light workloads only. We do not quote S140 for production arrays.
The T430 tops out at the H730P. The H740P with 8 GB NV cache is a 14th-gen controller and is not part of the 13th-gen lineup.
Processors
Dual-socket-capable on the Intel Xeon E5-2600 v3 (Haswell-EP) and v4 (Broadwell-EP) platform, the same processor family as the R430, R630, and R730. Most T430 deployments are single-socket because SMB workloads rarely justify the second socket; dual-socket is supported when the workload demands it. Higher-TDP CPUs (120W and above) should be paired with the performance fan option to hold thermals under sustained load.
Common T430 CPU choices
- E5-2620 v4 (8 cores, 2.1 GHz, 85W): Cost-floor volume SKU. Small Windows Server, basic virtualization (5-10 VMs), file-server roles.
- E5-2630 v4 (10 cores, 2.2 GHz, 85W): Balanced volume SKU. Mid-market application server, modest virtualization.
- E5-2640 v4 (10 cores, 2.4 GHz, 90W): Higher clock for SMB workloads that benefit from per-core performance.
- E5-2650 v4 (12 cores, 2.2 GHz, 105W): Higher core count for denser SMB virtualization or heavier application servers.
- E5-2660 v4 (14 cores, 2.0 GHz, 105W): Volume mid-range for branch-office towers with moderate virtualization.
Top-bin SKUs (E5-2697 v4, E5-2699 v4 at 145W) are supported but rarely justified on a tower; deployments at that performance level usually belong on the rack platforms, which offer better ROI and cooling headroom. Dual-socket T430 builds are uncommon; when a second socket is genuinely needed, the R430 or R630 typically deliver better value.
Memory
12 DDR4 DIMM slots, the same memory architecture as the R430 and half the slot count of the R630/R730 (which carry 24). Maximum capacity is 768 GB with 64 GB LRDIMMs. Speed is DDR4-2400 at 1 DIMM per channel on v4 CPUs and steps down to 2133 MT/s at 2 DIMMs per channel; v3 CPUs cap lower. RDIMMs are the volume choice; LRDIMMs are reserved for the rare maximum-capacity build.
Practical T430 memory configurations
- 32 GB (2 x 16 GB RDIMM): Cost-floor build. Small file server, basic Windows Server.
- 64 GB (4 x 16 GB RDIMM): Volume SMB primary server.
- 128 GB (4 x 32 GB RDIMM): Mid-market application server or modest virtualization (10-15 VMs).
- 256 GB (8 x 32 GB RDIMM): Higher-tier SMB virtualization or a memory-heavy application.
- 384 GB (12 x 32 GB RDIMM): Fully populated mid-tier build at full channel utilization.
- 768 GB (12 x 64 GB LRDIMM): Maximum T430 memory. Rare on a tower; the R630 is usually the more appropriate platform at this tier.
Networking and PCIe Expansion
The T430 ships with 2 x 1 GbE LOM as standard. 10 GbE is a PCIe add-in upgrade rather than a daughter-card option, which is the right move for VM-dense or storage-heavy roles; many SMB deployments run fine on the onboard 1 GbE. Common add-in cards include the Intel X550-T4 quad-port 10GBASE-T and Broadcom quad-port 1 GbE adapters.
The tower chassis carries roughly 5 PCIe Gen3 slots, more than the 1U R430's 2-3, giving a comfortable budget for a NIC plus a storage HBA plus an optional GPU without contention. PCIe Gen3 is the ceiling on this platform; there is no Gen4 on 13th-gen hardware.
GPU Support
The T430 supports single-width GPUs in low-profile or full-height form, with the NVIDIA T4 (70W, single-width, passively cooled) as the practical inference and light-VDI option. Double-width 250-300W compute GPUs are not a realistic fit: the tower PSU range and cooling envelope are sized for SMB workloads, not for accelerator density. For multi-GPU or double-width compute, the T630 tower or the R730/R740 rack platforms are the correct path. FPGA add-in cards are limited by the same power and thermal envelope as GPUs.
Management: iDRAC8 Enterprise
iDRAC8, the same management platform as the 13th-gen rack platforms. iDRAC8 Enterprise (recommended for any production deployment) adds full remote KVM, virtual media, and remote console over the dedicated management port; iDRAC8 Express covers basic out-of-band monitoring. Lifecycle Controller and OpenManage Enterprise integration are present and operationally identical to the rack platforms. A TPM 2.0 module is supported for deployments under NIST, CMMC, HIPAA, or PCI DSS frameworks. The one thing iDRAC8 lacks relative to 14th-gen iDRAC9 is Silicon Root of Trust hardware boot verification; if that is a compliance requirement, the T440 successor is the platform to look at.
Power and Cooling
The T430 uses 110V/220V auto-sensing power, so office electrical infrastructure handles it without a datacenter PDU. PSU options are a 450W cabled single supply (non-redundant, cost-floor), a 495W Platinum hot-swap, and a 750W Platinum hot-swap, the latter two supporting dual redundant configurations.
| Workload profile | Typical draw | PSU recommendation |
|---|---|---|
| Light: 1 CPU, 64 GB RAM, 4 HDDs, 1 GbE | 140-200W | 1 x 450W cabled or 2 x 495W hot-swap |
| Balanced: 1 CPU, 128 GB RAM, 8 HDDs, 1 GbE | 200-280W | 2 x 495W or 2 x 750W hot-swap redundant |
| Heavy: 2 CPU, 256 GB RAM, 8 SAS SSD, 10 GbE | 320-450W | 2 x 750W hot-swap redundant |
For any production deployment, 2 x 750W hot-swap redundant is the right specification. The 450W cabled non-redundant option suits very-budget builds where PSU redundancy is genuinely not required, which is rare for a primary server. Tower cooling is tuned for office acoustics; high-TDP CPU plus GPU combinations should be reviewed against the fan and PSU headroom at quote time.
Physical Specs & Platform Notes
- Form factor: 5U floor-standing tower, rack-convertible to 5U rack orientation with the dedicated conversion kit. Plan for a meaningful floor footprint in office deployment.
- PCIe expansion: Roughly 5 PCIe Gen3 slots in a mix of full-height and low-profile, enough for a NIC, a storage HBA, and an optional single-width GPU concurrently.
- Parts availability: Strong. The 13th-gen E5-2600 v3/v4 ecosystem (CPUs, DDR4 RDIMM/LRDIMM, PERC controllers, drive carriers, PSUs) is mature and well-stocked on the secondary market. Dell ProSupport on the platform has reached end-of-service, so third-party maintenance is the standard production support path in 2026.
- Accessories we recommend: The lockable front bezel for physical drive security in open-office placement, the tower-to-rack conversion kit if a move to rack infrastructure is on the roadmap, and matched LFF drive carriers for any field drive additions. We quote these by current part number at configuration time rather than listing fixed numbers here, since carrier and bezel revisions vary by chassis batch.
- Platform notes: No BOSS module and no Optane PMem on this generation. CPU and memory population should follow channel-balanced rules for full bandwidth. Drive form factor is fixed at the backplane: an 8-Bay LFF chassis cannot be field-converted to SFF, so choose form factor at procurement.
Our Assessment
Where it excels: The T430 8-Bay 3.5" is the right call for SMB and branch-office tower deployments where rack infrastructure is not available or appropriate and the workload fits the platform envelope (single-socket E5-2600 v4, memory typically under 256 GB, 8 LFF bays sufficient). Small-business primary servers for 50-100 user organizations, professional-services firms in legal, accounting, and medical practice, retail back-office at non-rack sites, branch-office consolidated infrastructure, modest SMB virtualization at 5-15 VMs, and tower-format file and backup servers are its strongest fits in 2026.
Where to look instead: If a rack and datacenter cooling already exist, the R430 4-Bay 3.5" or R730 16-Bay 2.5" are more space-efficient. If the workload needs more than 768 GB of memory, multiple GPUs, or more than 8 LFF bays in tower form, step up to the T630 tower. If performance-tier SSD storage is the priority, the T430 16-Bay 2.5" SFF companion is the better chassis. If the deployment is planned to run four or more years and Silicon Root of Trust or DDR4-2666 matters, the T440 14th-gen tower is worth the premium.
Bottom line: For an SMB or branch site that needs a capable, serviceable server on the floor rather than in a rack, and that values acquisition cost and bulk local capacity over the newest platform, the T430 8-Bay LFF is the cost-correct buy. It is the tower workhorse of the 13th-gen lineup: proven, well-stocked for parts, and dependable for the file-server, application-server, and light-virtualization roles that define small-business infrastructure.
Where the T430 Fits in 2026
The T430 is two generations behind the current Dell tower line and its factory support has wound down, but that is exactly what makes it the value play. The 13th-gen platform is mature: firmware is stable and finalized, the parts ecosystem is deep, and pricing reflects a server that has fully depreciated rather than one carrying a current-generation premium. For workloads that do not need the newest platform features, paying for 13th-gen hardware and pocketing the difference is the rational procurement decision.
Use the T430 when acquisition cost and proven reliability lead the decision. Move up to the T440 when you need iDRAC9 with Silicon Root of Trust, DDR4-2666, the BOSS-S1 boot module, and a longer forward support runway. We will show both at quote time with current secondary-market pricing so the generational tradeoff is grounded in real numbers.
Honest Limitations
- 12 DDR4 DIMM slots, 768 GB maximum. Half the slot count of the R630/R730. For higher memory in tower form, the T630 is the 13th-gen path.
- 8 LFF bays is the chassis ceiling. Not expandable. For more tower storage, the T630 is the larger chassis.
- 5U floor footprint. A significant physical presence for office deployment. Confirm placement before ordering.
- Office-appropriate acoustics, not silent. Audible fan operation under load. Executive offices or conference rooms may want additional sound dampening.
- No BOSS module. Boot redundancy costs either two front bays or an internal SSD mount, unlike the 14th-gen BOSS-S1 approach.
- PSU range is lower than the rack platforms. 450-750W versus the R630/R730's 495-1100W, which constrains high-TDP CPU plus GPU combinations.
- iDRAC8, not iDRAC9. No Silicon Root of Trust. DDR4 caps at 2400 MT/s, no Optane PMem, PERC tops at the H730P, and PCIe is Gen3.
- Single-socket-friendly platform. Most builds are single-socket; dual-socket is supported but the rack platforms usually deliver better dual-socket value.
- Narrowing OS support. Recent OS releases may have limited 13th-gen validation. Confirm OS compatibility at quote time.
Workload Fit
| Right for | Consider alternatives for |
|---|---|
| SMB primary servers (50-100 users) | Rack infrastructure already available (R430 / R730) |
| Professional services (legal, accounting, medical) | More than 8 LFF bays needed (R730 / R730xd) |
| Branch-office tower consolidation | More than 768 GB memory required (R630 / R730) |
| Tower-format file server and SMB backup | Dense virtualization, 20+ VMs (R630 / R730) |
| Modest SMB virtualization (5-15 VMs) | Four-plus-year production deployments (T440 14th gen) |
| Office-deployable acoustics | Multi-GPU or GPU compute (T630 / R730) |
| Retail back-office at non-rack sites | Performance-tier SSD storage (T430 16-Bay SFF) |
Where to Look Instead
- Need SSD performance instead of bulk capacity: the T430 16-Bay 2.5" SFF companion is the same platform with sixteen 2.5" bays for dense SAS SSD.
- Need more memory, more bays, or GPUs in a tower: the T630 8-Bay tower and T630 16-Bay tower carry 24 DIMM slots and multi-GPU support.
- Stepping up a generation: the T440 8-Bay 3.5" tower is the 14th-gen successor with iDRAC9 and BOSS-S1.
- Rack infrastructure available: the same-generation R430 4-Bay 3.5" (1U) or R730 16-Bay 2.5" (2U) are more space-efficient.
- Shared platform reference: the R630 10-Bay 2.5" page documents the 13th-gen controller, networking, and management vocabulary in full.
Ready to Configure?
Tell us your workload, target CPU SKU, memory capacity, drive count and type (8 LFF maximum on this chassis), RAID requirement, boot configuration (front-bay mirror, internal SSD, or IDSDM), PSU preference (cabled non-redundant or dual hot-swap), networking speed, and quantity. We respond within 24 hours. If you would like a side-by-side against the T440 8-Bay 3.5" at current secondary-market pricing, ask at quote time and we will return both options with formal numbers so the generational decision is informed by real cost.
Every Wholesale Servers T430 ships after a 12+ hour burn-in covering every PCIe slot, memory channel, and drive bay, and carries a 180-day warranty with optional 1-Year, 2-Year, and 3-Year Premium coverage. Volume pricing applies at 5 units and above. Call 1-800-778-1545 or use the quote form on this page.
Save Your Design
Click the Add to Quote button at the bottom of your screen to save your design as a draft order for future reference and to check for discounts, lead time, and availability. Most servers ship within 1-3 days.
